The Barnstead/Thermolyne SterileMax sterilizer is a fully-automated, microprocessor-controlled, tabletop autoclave with a 12-inch diameter by 18-inch deep, round, stainless-steel chamber. The SterileMax is a 115-volt model that draws 12.5 amps of current during operation and can be connected to a standard 115-volt, 20-amp receptacle. Microprocessor-controlled sterilization parameters are constantly monitored to assure proper sterilization for each programmed cycle. Five icon-marked programs are available on the sealed-membrane touchpad (e.g., wrapped, unwrapped, liquids, packs, optional). All sterilization parameters are user adjustable, digitally displayed, and recorded at one-minute intervals with the optional printer. The digital display(s) indicate cycle status during normal operation and display error messages and corrective actions if a cycle fails to meet the proper sterilization parameters. The autoclave measures 17 inches high by 22.4 inches wide by 24.5 inches deep and is UL/C-UL listed, IEC 601-1 inspected and ASME certified.
The Barnstead/Thermolyne SterileMax provides an increased chamber size while still maintaining a small footprint. It features five pre-set cycles for packs, wrapped instruments, unwrapped instruments, liquids, and an operator defined cycle, and the drying time is adjustable. Its microprocessor-controlled diagnostics continuously monitor sterilizer parameters and a digital readout provides error messages and corrective actions if the sterilization fails during a cycle. The chamber door is equipped with three interlocks to protect the operator. The large seven-liter reservoir can be easily and completely drained for cleaning. During clinical evaluation it performed flawlessly and the operating and servicing instructions were clear, complete, and easy to understand. The sterilizer is best used in small clinics with one or two dentists or to supplement a large, floor-standing sterilizer.
During the drying cycle the sterilizer door must be opened, which can be inconvenient. The printer uses a lot of paper during the average sysle, and there is not take-up spool.
This review has been adapted from the DECS website. The DECS has no formal association with Dentalcompare or with vendors listed on dentalcompare.com. The DECS does not specifically endorse any particular product or vendor and is provided for informational purposes only.
