New Dental Products 

The Bravo fractionated vacuum chamber autoclave incorporates both pre-vac (to remove air) and post-vac (to help drying) cycles to ensure optimal steam penetration for any load. Bravo is true to the Statim reputation for speed, providing rapid cycles for unwrapped instruments.

Bravo benefits include:

Fast cycle times
Fractionated vacuum system
Closed door drying with Dri-TecV technology
Single use Pull’n Push water system
Easy to use – single button operation ,br> Conforms to international and national standards (ie. CDC, ST, ISO, EN, BS)
Integrated printer option
Patented door locking mechanism and steam generation system
17 or 21L chamber capacity
120V or 220V options

Added 11/16/2009

The Midmark M3 UltraFast® Automatic Sterilizer is an autoclave that sterilizes unwrapped instruments and handpieces in just 6 minutes and pouched instruments in just over 10, with the touch of a button. The M3 features One-step loading, Push-button cycle selection, automatic-opening door, water level monitoring, 25 minute drying, convenient top-fill access to water reservoir, and a front reservoir drain with on-board drain tube storage. The condensate tank has a quick release lid, convenient carrying handle and water level sensor. The M3 was designed for use as a stand-alone sterilizer or as a complementary sterilizer to the Midmark M9 and M11. All three are similar in ease of use and function - the M9 and M11 provide maximum sterilizing capacity, while the M3 provides the speed required when instruments are needed quickly. The M3 is equipped with a fully automatic door that closes at the start of each cycle and opens at the end of each cycle to dry an instrument load in as little as 25 minutes. This feature increases efficiency and eliminates the need to monitor the sterilization cycle, freeing the clinician to perform other tasks.

The Midmark M3 provides three pre-programmed cycles. In addition, the ergonomically developed, removable M3 door tray is easy to use and maneuver. The door tray slides into the sterilization chamber effortlessly for easy loading, while its convenient open-top design assures simple, fast and consistent instrument processing, saving time for the clinician. The M3 fits on a counter or in a steri-center. Several handpieces and instruments can be accommodated in one load, and the tray is large enough to hold a standard Hu-Friedy® Signa-Stat cassette.

Added 11/15/2009

The four Orascoptic DK Diagnostic Kits include a battery-powered handheld LED light source and these interchangeable instruments.

The DK transillumination instrument emits an intense, focused beam of light to help visualize crown fractures and caries in teeth. This device makes it easy to identify anterior and posterior proximal caries.

The DK Fiber Lite Attachment holds disposable fiber optic fibers; one for endo work to more precisely illuminate caries, and one with 3, 5 and 7mm tick marks for perio work such as measuring pocket depth.

The DK lighted mirror features a powerful LED light source to illuminate the mirror's reflection. This is the perfect instrument to increase visual acuity in those hard to see places within a patient’s mouth.

The four kits are:

1. Orascoptic DK™ BASIC: featured the LED handle and transilluminator
2. Orascoptic DK™ ENDO: features the LED handle, fiber lite instrument and disposable endo fibers
3. Orascoptic DK™ PERIO: features the LED handle, fiber lite instrument and disposable perio fibers
4. Orascoptic DK™ PRO: features all the tools contained in the other kits, plus the lighted mirror.

All instruments are autoclavable, and additional rinse is available separately.

Added 11/13/2009

Offering 8 watts of power and 1064 wavelength (comparable to Nd-YAG lasers), the InGaAsP 1064 dental laser provides pulse duration control witht a click of the dial--from 1 ms to 50 ms as well as continuous. Presets provide one-touch complete settings.

Weighing three pounds, the compact countertop InGaAsP 1064 operates on battery up to three weeks without charging or can be connected to DC outlet. It is engineered for rapid procedures and reduced cost per patient.

Added 11/13/2009

Curve Hero is a full-featured practice management and clinical software package that is Web-based, which eliminates the need for back-ups, servers, and up-front costs for software. It offers Dental Charting, Perio Charting, Clinical Notes, Patient Education, Treatment Planning, Billing Software, Reporting, Scheduling, Insurance Management, Training, Communication, Data Backup, Imaging , and more. With web-based software, the practice can access patient data from anywhere at any time, data backup and security is ensured, and upgrades become available automatically.

Added 10/23/2009

The Anterior Contacts Mirror simplifies photographing overjets and anterior contacts. The inset curved end follows the curve of the arch for comfortable placement. The mirror can also be used for standard occlusal arch views.

Added 10/21/2009

PhotoMed's new R2 Dual Point Flash Bracket is designed to provide maximum flexibility in flash positioning. Bring the flash heads in towards the lens for posterior views and mirror shots. Spread the flash heads out to the side for anterior aesthetic images and natural looking smile shots. Each flash head can be repositioned "on the fly" with one hand.

The R2 Bracket is available in Nikon or Canon configurations and is compatible with Nikon's R1 and R1C1 macro flashes and Canon's MT-24EX macro flash.

Added 10/21/2009

The PhotoMed G11 Digital Dental Camera is specifically designed to capture all standard clinical views with "frame and focus" simplicity. The built-in color monitor enables the subject to be precisely framedjust focus and shoot.

Proper exposure and balanced even lighting are assured. By using the camera's built-in flash, the amount of light necessary for a proper exposure is guaranteed and PhotoMed's custom closeup lighting attachment redirects the light from the camera's flash to create a balanced, even lighting across the field.

Added 10/21/2009

CAESY DVD 9 is the latest version of CAESY DVD format patient education software. It enables dental professionals to efficiently and consistently explain diagnoses, procedures, alternatives and post-op instructions in operatories and consult rooms.

The new version includes seven new presentations, as well as 29 updated presentations to enhance patient education throughout the practice.

The DVD features a completely updated esthetics section, as well as all-new modules on Digital Panoramic X-ray, the Caries ID detection wand, Medications, Esthetic Crown Lengthening, Free Gingival Graft, Sinus Lift, and Subepithelial Gingival Graft. CAESY DVD 9 also features updated CAD/CAM presentations to include the new CEREC AC powered by Bluecam. New 3-D animations and live-action video also help keep the presentations fresh.

Added 10/06/2009

The new 5.25 x 6.5 size Sure-Check Sterilization Pouch is designed for bur blocks and impression trays.  Sure-Check sterilization pouches have internal and external "multi-parameter" indicators that clearly show if the three parameters for sterilization have been met during processing - required temperature for the proper amount of time and contact with saturated steam under pressure (as recommended by CDC infection control guidelines and ISO sterilization standards). 

Sure-Check pouches provides a reliable indication that the required conditions for sterilization have been met as compared to using internal single parameter pouches.  The use of Sure-Check pouches saves money and time because there is no need to purchase separate indicator strips and insert them into the pouches. 

Added 09/25/2009

Stainless steel bur blocks 9931 and 9933L3 (shown in photo) are designed for simple cleaning, disinfection, sterilization, and storage of dental instruments. Any KOMET friction grip or contra-angle instruments stored in these bur blocks can be cleaned and disinfected either in an instrument and/or ultrasonic bath (in which case the block must be closed), or in the thermo disinfector (in which case the block must be open). The sterilization takes place in the autoclave. The bur blocks' blue silicone plugs hold the instruments tightly in place; the instruments cannot fall out. In refill packs of 8 pieces, the silicone plugs are also available in yellow and red. Block 9931 holds up to 9 instruments and block 9933L3 holds up to 12 instruments.

Added 09/24/2009

TwinPower Turbine now features ceramic ball bearings. Forty percent lighter and three times harder than conventional bearings, they offer an extended turbine life, reduced operation noise, and less vibration. For maximum torque control, TwinPower’s double-impeller design delivers up to 22 watts of power. Its compact head has a height of just 13.2mm. A mini head design is also available which offers high cutting efficiency. Other features include zero suck back in the air line, rapid braking within 2 seconds, glass rod optics, and direct connection to popular coupling systems.

Note: TwinPower Turbine handpieces sold in Canada feature metal ball bearings.

Added 09/22/2009

The Identafi™ 3000 ultra is an upgraded version of the original small, cordless, handheld oral cancer screening device. The ultra features enhancements such as nickel-plating, double the auto-fluorescent power, and both hardware and software upgrades. The device uses a three-wavelength optical illumination and visualization system to allow dental professionals to catch early cancers not visible to the naked eye.

The Identafi 3000 ultra features the same proprietary, patented multi-spectral light wavelengths as the popular Identafi 3000. A study published in the May 2009 issue of Cancer Prevention Research found that the excitation wavelength delivered by the Identafi 3000 (and Identafi 3000 ultra) is optimal for discriminating between neoplastic and non-neoplastic lesions. New diodes deliver twice the auto-fluorescent power to further improve visualization.

The Identafi 3000 ultra uses three different wavelengths of light to excite oral tissue in distinct and unique ways. Biochemical changes can be observed with fluorescence, while morphological changes can be observed with reflectance. This multiple wavelength technology identifies abnormal tissue with more accuracy than a single color wavelength.

Nickel plating has been added to the Identafi 3000 ultra to boost electrical conductivity, improve durability, and provide a smoother feel. Trimira has also made hardware and software upgrades to maximize the device’s performance.

Added 09/16/2009

The Isolation Block device features the combination of a bite block, tongue shield, and lip retractor that suctions continuously. It is designed to provide isolation and a dry working field in both arches. The disposable device is made of medical grade silicone for patient comfort. It attaches easily to low volume suction. The Isolation Block comes in three color-coded sizes to fit all patients.

Added 09/16/2009

Compatible for integration with existing delivery units, the Digital Doc iCon intraoral video camera has all components integrated in the handpiece. That includes a USB 2.0 connector that plugs into the computer for fast image downloading and easy viewing with compatible imaging software. The USB camera is designed to hang next to the high speed handpiece. It has dual capture buttons for right or left hand use and a focus capability that allows adjustment from macro to full smile with a touch of a finger. Advanced optics and digital technology deliver clear, detailed images. Eight LEDs serve as the light source

Added 09/15/2009

The Root Tip Extractor allows dentists to perform root tip extractions in 3-5 minutes, and replaces the use of root pick elevators and/or surgical burs.

The instrument is a universal extractor that can be used as maxillary or mandibular with a simple rotation of the head. It attaches to the end of a 28mm or 30mm length extraction bur that was previously drilled into the fractured root tip. The hand piece used to extract the root tip locks on to the extraction bur, allowing for quick and easy root extraction.

The Root Tip Extractor reduces trauma, decreases healing time, and dramatically reduces the risk of damaging the bone and/or socket.

Every purchase of the Root Tip Extractor™ comes with a training DVD, describing the extraction process in detail. Furthermore, all clients have access to on-site training at an additional cost.

Added 09/15/2009

The gumEase cryoanesthetic single-use dental mouthpiece acheives a regional pain block by applying extreme cold to maxillofacial nerves. Suitable for procedure and post-procedure pain control, the non-invasive drug-free device is made of a proprietary noDOP PVC biocompatible compound that adapts comfortably to the patient's mouth; it is prepared by storing in a freezer. As soon as the gumEase is placed in the sulci, numbing takes effect in 8 minutes. An assitant can place the gumEase without the dentist being present. It anesthetizes all four quadrants. Anesthesia is achieved with three consecutive devices that were previously frozen to 22 degrees F.

Added 09/15/2009

Awaiting FDA 510K market clearance as of mid-September, the SIROLaser Advance 980 nm diode laser is an ergonomic, battery-powered unit that incorporates an integrated finger switch (although a wireless footswitch is optionally available), bendable single-use tips that accommodate any angle, and intuitive color touchscreen navigation. Fiber length is adjustable with a fingertip.

Other features include 24 programmable applications and five user profiles, presets for common procedures, user prompting, data storage for every procedure and all users, and three operation modes: continuous wave, chopped, and peak/pulse.

The SIROLaser Advance package includes the sterilizable handpiece, sterilizable fibers in multiple diameters, three pairs of laser safety glasses, 100 single-use bendable tips, and 50 patient education brochures.

Added 09/15/2009

Available for iPhone and BlackBerry users, the PEARL software application is an add-on module for PracticeWorks management/clinical software enabling real-time information to be accessed remotely from a mobile device. Dentists can view and act upon real-time information related to patient and treatment detials, scheduling, financials, call-backs, prescriptions and pharmacies, referring providers, and more.

Among the tasks that can be performed remotely using PEARL:

Handle emergencies by accessing patient records after hours
Manage after-hours calls to patients, referring doctors, and staff
Access scheduling inforamtion to add patients and make changes
View graphs and data about practice finances

PEARL software delivers secure two-way data flow and is easy to use, requiring little to no learning curve. No patient data is stored on the mobile device.

PEARL is available for Kodak PracticeWorks, SoftDent, OrthoTrac, and WinOMS CS practice management systems.

Added 09/15/2009

The everLight LED operatory light provides color-corrected lighting, precise light pattern, and energy efficient features. Offering energy-efficient features not possible using traditional halogen lighting, the everLight encompasses a long life of 30,000-plus hours, 10 times longer than halogen, reducing the need for regular replacement of lightbulbs. Additionally, the everLight uses less than 35 watts of energy; 70% less than halogen-based systems.

No reflector or fan is required for the ultra-quiet everLight, because it is 100% true direct LED lighting and remains at a consistent, cool temperature.

everLight is equipped with nine temperature/intensity settings and the LED technology provides natural daylight illumination and a precise light pattern, which results in clear oral cavity visibility and exact color matching. The everLight’s LED composite setting will not cause pre-maturing on composite materials.

The everLight is ergonomically equipped with a standard third-axis rotation, allowing limitless positioning for optimal illumination. The everLight is easily installed in six mounting configurations.

The everLight has an extended life expectancy and comes with a best-in-class 3-year warranty combined with a 6-year warranty on the unit’s engine components (switches, LED driver, and Lens).

Added 09/15/2009

HemCon Dental Dressing is a wound dressing material that utilizes a proprietary technology to effectively seal the wound and minimize pain in various surgical procedures. Designed to become extremely sticky when placed in contact with blood, the HemCon Dental Dressing immediately seals and protects the wound, while simultaneously relieving pain. Safe, sterile, and easy-to-use, the dressing eliminates the need for traditional sutures in a number of common dental applications — including tooth extractions, donor site soft tissue grafts, biopsies, maxillofacial trauma, and surgical flap procedures — expediently stabilizing the blood clot, and dissolving over time.

The HemCon Dental Dressing, manufactured by HemCon Medical Technologies Inc. and exclusively distributed by Zimmer Dental, is made from chitosan, a biocompatible polysaccharide derived from the exoskeleton of arctic shrimp. It contains no human/animal clotting factors.

Added 09/10/2009

The Zimmer Sinus Lift Balloon is designed to simplify vertical sinus elevation and imporve results when performing a traditional sinus lift procedure. The balloon prevents the Schneiderian membrane from tearing, which can significantly disrupt an implant case.

The balloon instrument is also well-suited for effectively measuring the required bone grafting material. For example, 1cc of saline, which is used to inflate the balloon, is equal to 1cc of grafting material.

The Zimmer Sinus Lift Balloon is available in three convenient, single-use configurations for optimum efficiency and ease-of-use. The angled design is ideal for lateral window procedures, the straight model is well suited for a crestal approach, and the micro-mini design can be used for either of these indications.

Zimmer is offering the sinus lift balloon at the first in a series of “sinus lift solution” products stemming from an exclusive distribution agreement with Osseous Technologies of America (OTA).

Added 09/07/2009

Wingrove Titanium Implant Instruments are made with USA medical grade titanium and have ideal hardness for implant maintenance. The original integrity of the blade and toe design can be maintained by the practitioner using traditional sharpening methods.

Designed for ease of access and adaptation to allow efficient whole mouth debridement, the three instruments are a Barnhart 5-6, a Langer 3-4, and an instrument with a blunted Nebraska 128 on one end and a Langer 5 Mini on the other.

Added 09/01/2009

The XIOSPlus intraoral sensor system provides flexibility of capturing quality digital X-rays by using either an Ethernet or USB module. With Sirona’s intuitive SIDEXIS XG software, practitioners can view digital X-rays directly on any computer monitor or the office network without license fees.

The Ethernet (wall module) is easy to integrate into any network. Using its large-sized multicolor display, the user can confirm patient information prior to taking the image. Various LCD colors indicate the current operational status. The wall module also allows the user to plug in two sensors simultaneously, so that the right sensor is always close at hand. The built-in sensor holders also reduce clutter and minimize the risk of damage to the sensors.

The USB module can be connected to any PC as a true “plug-and-play” component, allowing sensors to be used anywhere they are needed. The USB module also features LED indicators of system status.

Available in two sizes, XIOSPlus sensors are designed to be robust and ergonomic. The thin cable connection, beveled edges and anatomically rounded corners allow quick, easy positioning in the patient’s mouth. The Active Pixel (APS) CMOS sensors (pixel size: 15 µm) achieve offer high image quality and speed. The automatic pre-processing options in SIDEXIS allow the clinician to select preferences for a broad spectrum of diagnostic applications.

Added 08/31/2009

The MaxilloPrep Spread-Condense system (Kit 4596) comprises titanium Spread-Condense screws for bone spreading and condensation. The screw’s shape is initially cylindrical turning after 5 mm into a tapered shape with threaded flanks (up to a total length of 15 mm), exerting effective spreading and condensing pressure on the bone.

Depth marks placed in intervals of 2 mm allow penetration depths to be visually controlled at all times starting at 8 mm from the tip of the screws. Depth marks are easily recognizable because the surface’s lasered color which alternates between light and dark every 2 mm. The screws rounded ends help protect from inadvertent perforations.

Using a hand wrench, Spread-Condense screws are inserted into a small pilot hole, prepared by a stainless-steel drill (210L16). The screws are then screwed in and out in ascending order until the required target size is reached, ensuring optimum primary stability of the subsequently inserted implant. The MaxilloPrep Spread-Condense screws can also be used for bone condensing treatments of a spongy bone structure.

The screws are available in 5 sizes; sizes 4 and 5 also come with a triangular cross-section for condensation and expansion of extremely hard bones. Because all screws are made of pure titanium, they are designed for multiple uses.

Added 08/28/2009

The HELIODENTPLUS is a compact, ultra-light, intraoral X-ray generator for film-based and digital imaging. The user can switch from the film-based to the digital mode with the touch of a button. The HELIODENTPLUS incorporates a robust arm assembly to fit any operatory; various arm lengths provide easy, stable positioning for taking any intraoral image. The various controller options also allow for flexible installation requirements. The vertical mount can be incorporated in pass-through and central cabinet installations. Furthermore, with a built in power regulator, the HELIODENTPLUS eliminates the risk of being affected by power fluctuation.

Exposure times are selected by using easy-to-understand tooth icons. Two patient size icons select exposure settings. The user also has the option of customizing the preprogrammed exposure times. Two power settings are available: 60 kV for high-contrast images; and 70 kV for highly detailed images and a minimum radiation dose.

In connection with established Sirona digital sensors, HELIODENTPLUS supplies first-class digital images, and the SIDEXIS XG software displays these images in real time.

Added 08/26/2009

The Xpod Wireless X-Ray Sensor with Handheld Touchscreen is a pocketsize device that provides instant diagnostic quality radiographic images on a handheld device. The high resolution images can be reviewed and zoomed on a wide yet pocketsize touchscreen display without external power supply, wires, software or a PC. After an overnight charge, the X-pod provides a whole day’s autonomy from the lithium-polymer battery. The two sizes of X-pod intraoral sensors feature a thin outer casing and with chamfered edges and rounded corners. Sealed and liquid proof, the sensor has a hardened outer casing and a reinforced cable attachment. X-pod incorporates a hot-plug for small and large MyRay sensors, a fast USB port for convenient data sharing and Bluetooth interference-free wireless connectivity.

The system uses Bluetooth 2 wireless communication technology for fast image transfer to your PC only, respecting patient privacy. The MyRay patented interference-free implementation makes it even more reliable and safe. Once on the PC, any imaging software can be used to mount images in full-mouth templates.

Added 08/21/2009

GC MI Paste now is available in Mint only 10-Tube Packs. Each box contains ten (40 g) tubes Mint flavor only MI Paste.

MI Paste restores minerals (calcium and phosphate) to help patients stimulate saliva production. It contains RECALDENT™ (CPP-ACP), a milk-derived protein-mineral complex that helps remineralize teeth. MI Paste is a topical crčme that can be applied to teeth safely and effectively several times daily. MI Paste has less than 0.1% lactose and is safe for lactose intolerant patients.

Saliva will enhance the effectiveness of CPP-ACP and the flavor will help stimulate saliva flow. The longer CPP-ACP and saliva are maintained in the mouth, the more effective the result. A topical crčme containing bio-available calcium and phosphate will:

1. Provide extra protection for teeth.
2. Help neutralize acid challenges from acidogenic bacteria in plaque.
3. Help neutralize acid challenges from other internal and external acid sources.

Added 08/21/2009

The COMFORTdrive 200 XDR high-speed handpiece features patented micro-motor technology. It is engineered to offer the light weight and ergonomics of an air turbine handpiece along with the precision cutting and quieter sound of an electric handpiece.

COMFORTdrive offers precise cutting performance with exceptional bur concentricity to assist with faster and smoother preps. The no-bur-stall feature of COMFORTdrive improves efficiency in gross reductions and crown and bridge preparations. The SAFEdrive technology features an integrated sterilizable motor that delivers 30 watts of constant power for consistent performance.

COMFORTdrive weighs approximately 40% less and is 15% shorter than market-leading electric options. The integrated motor reduces the distal area length after the pivot point in the doctor’s hand allowing for optimal comfort and control. The COMFORTdrive operates at only 55 dB.

The COMFORTdrive system features an innovative “Plug-n-Prep” auto-calibration technology for easy setup that does not require adjustment to any other equipment in the office. Once calibrated, the COMFORTdrive system allows for an air-like “feathering” effect between 30,000-200,000 rpm with the foot pedal. Therefore, doctors using air-driven handpieces can seamlessly transition to COMFORTdrive with no learning curve.

The small footprint of the COMFORTdrive system incorporates into any operatory, offering an aesthetic, clean look in the dental practice. The COMFORTdrive system will be available as an integrated option into the Pelton & Crane Spirit 3000 series of delivery units in 2010.

Added 08/21/2009

The Track Light Monitor from Midmark provides optimal dental lighting with exceptional monitor positioning, providing an enhanced patient experience while improving efficiency and case acceptance. The system offers a 17-inch dental-grade monitor (viewable overhead or chairside), a color-correct reduced-shadow light, independent movement of light and monitor, height and side-to-side adjustability, easy tilt and swivel, seamless integration of PC, TV & DVD. Other features include inputs for VGA, 3.5 mm PC audio, coaxial cable, HDMI, S-Video and RCA composite along with robust, double shielded cables with over molded connectors.

Added 08/17/2009

BodyGuard LX seating line is a luxury edition of Orascoptic’s line of BodyGuard seating systems. The BodyGuard LX line includes all of the adjustable features of the original BodyGuard product along with fabric, padding, and color upgrades for additional comfort and performance. The LX line features stitched Ultra-Leather fabric and extra-plush Visco-Elastic cushioning for comfort. LX chairs are available in a single color, or in custom dual-color combinations. There are over 40 colors to choose from.

The new BodyGuard LX was designed to position the clinician correctly, to relieve muscle stress and discomfort. The result is a longer, healthier career. The BodyGuard line includes an operator’s chair, an assistant’s chair, and an armless Stool. Each system employs adjustable components to customize the position of your arms, legs, seat, and back.

Added 08/14/2009

The DEXIS Platinum intra-oral sensor features a direct USB connection, new image capture technology, and enhanced ergonomic design. Maintaining both the comfort and single-sensor concept of its DEXIS PerfectSize sensor, DEXIS Platinum now combines direct USB connectivity, TrueComfort design, and PureImage technology for a new experience in digital imaging. The sensor is durable and portable for use in multiple operatories and fieldwork and its integrated USB functionality eliminates the need for adapters, controllers, or docking stations.

For patient comfort and ease-of-use, DEXIS has enhanced the ergonomic sensor housing--the TrueComfort design of the Platinum sensor’s refined beveled corners and its rounded casing ensure that there are no sharp edges against the patient’s tissues. The new smaller, angled dome on the back of the sensor incorporates the patented WiseAngle™ cable exit that increases comfort and efficiency for precise placement.

The Platinum sensor also incorporates PureImage technology — a combination of highly sophisticated software and premium-quality hardware components that provides 16,000 shades of gray generated by a 14-bit analog-to-digital converter. The sensor’s high resolution provides more than 20 visible line pairs offering remarkable image clarity and virtually no visual noise. Additionally, an exclusive design maximizes active area at the pixel level, bringing out the smallest details. With a 2.2-megapixel size, images remain crisp when enlarged.

The DEXIS Platinum sensor has an enhanced quantum efficiency which makes it very receptive and efficient when capturing X-ray images across a dynamic range of radiation settings. This delivers the ability to reduce the number of retakes due to under- and over-exposure, as well as ultimately lower radiation dosages. The sensor produces optimal, consistent images whether using with the latest intra-oral X-ray unit or an older model.

Added 08/12/2009

GEM light-weight Class II flip-up loupes are designed to offer quality resolution, clarity, and visual acuity at an economically affordable price. GEM loupes are exceptionally lightweight for all-day comfort. The GEM is ideal for first time loupe wearers, students and dental assistants who want all the benefits of magnification at an affordable price.

The GEM features Orascoptic’s popular titanium Victory frame, and is available in slate or wine color. Each GEM is backed by a limited lifetime warranty and comes with side shields, a head strap, protective lens caps, and a sleek black storage case.

Through December 31, 2009, GEM loupes are available for free with the purchase one of Orascoptic’s HiRes or HiRes Plus loupes. This offer cannot be combined with any other Orascoptic promotion.

Added 08/10/2009

Designed to be dual use, DEFEND Vented Oral Evacuation Tips are vented at one end and non-vented at the other end. The convenient, one-time-use, disposable tips fit all standard evacuator hose ends. DEFEND Vented Oral Evacuation Tips have smooth edges for maximum patient comfort. The straight handle provides increased control. Evacuation tips are non-sterile, 1/8" in diameter, and are available in standard and short (3") lengths.

Mydent recently re-launched its rewards program and for a limited time is offering a 1,000 point bonus and double points on purchases. The rewards program allows customers to redeem points earned from product purchases for gifts such as bikes, grills, jewelry, electronics, and much more.

Added 08/05/2009

Tru-Pan for iCAT is software that yields precise “true” volumetric panoramic views from 3-D scans. Developed to meet the needs of dental professionals who require quick and easy pan creation from existing 3-D scans, Tru-Pan delivers anatomically accurate and precise panoramic images with optimal clarity and detail plus time savings over traditional arch detection methods found in today’s 3-D imaging programs.

Tru-Pan’s advanced reconstruction of unique anatomic landmarks automatically creates a custom, optimized focal trough specific to each patient. This focal trough detection reveals a new level of detail that delivers consistently crisp and clear views of root tips and crowns, including the incisor regions, and sinuses — all within one panoramic image.

Tru-Pan’s panoramic images are created with just one click of the mouse. The automatic custom focal arch detection works in conjunction with the patient’s 3-D data to quickly and efficiently extrapolate “true” and precise panoramic views. These consistent and optimal results save minutes of valuable clinical time over manual and semi-automatic arch setting techniques.

Available as an optional feature in the i-CATVision™ software, the easy, one-click function triggers automatic reconstruction with no additional training for clinicians or team members.

Added 08/04/2009

Compatible with common E-type surgical handpieces and attachments, the AEU-26OS from Aseptico features basic handpiece calibration, torque control, a sleek design, customizable presets, and upgradable software for a long return on investment. Similar to Aseptico’s AEU-17Bv2 series, the AEU-26OS does not include a built-in pump, requiring the use of an external irrigation, such as the NWS-9 Sterile Irrigation Delivery System for any high-speed drilling applications. If a built-in irrigation pump is desired, then Aseptico recommends its AEU-707Av2, AEU-6000/70V, and AEU-7000-70V models.

Added 06/29/2009

Foundation, a collagen-based, bone filling augmentation material for use in extraction sites, now is available in an assortment pack. Foundation is shaped in bullet form and is available in both small and medium sizes for easy placement. The new assortment pack contains a convenient mix of 3 small and 3 medium bullets. With the ability to trim or shape the material, and both sizes now available in one box, the assortment pack simplifies the proper filling of any size socket.

Foundation is not a bone substitute, but rather stimulates new bone growth at an accelerated pace. Immediately following an extraction, Foundation is placed into the socket. The surrounding cells and capillaries gradually infiltrate Foundation. As the extraction socket heals, it is filled with new augmented bone.

Added 06/25/2009

MaxilloPrep stainless-steel instruments are designed for the safe and effective removal of bone and soft tissue during bone grafting and expansion procedures. The three instruments are:

Trepan burs (TRT.205.045/055/065) are designed for the removal of bone blocks. With its proprietary blade configuration, its cutting teeth are arranged in pairs, allowing a non-traumatic treatment for optimal results. Large perforations within its working parts allow for an unobstructed view of the site and facilitate the removal of bone cylinders. Depth marks around the periphery allow exact determination of preparation depth.

Congruent Centering burs (TRC.205.045/055/065) precede the trepan burs and allow exact positioning and controlled guidance. Optimal centering and easy bone penetration is due to its triangular tip. And because of its staggered (inclined) front toothing, centering burs provide a non-traumatic treatment and the safe creation of a circular guide groove. The bore holes in its working part allow an unobstructed view onto the operative site.

The bone chip extractor (9126.204.042/060) is designed with a self-centering tip ensuring correct positioning at the operative site. This rotary extractor allows precise, yet gentle removal of bone chips which can be collected and evacuated using any standard bone filter.

MaxilloPrep instruments are available in both a stainless-steel starter kit (Kit 4571, containing one of each instrument) or a complete kit (Kit 4572, containing all eight instruments, treatment tray and container for sterilization).

Added 06/23/2009

Now available in the United States, the Hex-Lock Short Abutment and Restorative System is an all-inclusive system designed to promotes simple, immediate, and convenient posterior restorations. It includes the new titanium Hex-Lock Short Abutment and corresponding Short Restorative Components to address clinical situations such as limited interocclusal space, reduced visibility, and time-consuming prep work.

With the Hex-Lock Short Abutment’s reduced cone height, predetermined margins, and off-the-shelf convenience, chair and preparation times can be significantly reduced. The all-inclusive Restorative System provides snap-on caps for easier abutment level impression taking, and prefabricated copings for immediate provisionalization and final crown preparation.

Because the restorative protocol is the same as Zimmer Dental’s Hex-Lock Contour Abutment System, no additional learning curve is required, and with color-coding to match the emergence profiles, customers have a system that is simple, immediate, and convenient. The Hex-Lock Short Abutment and Restorative System is appropriate for single- and two-stage protocols, and is designed to work seamlessly with the Tapered Screw-Vent and Screw-Vent Implant Systems.

Added 06/22/2009

The Nikon D5000 digital SLR camera features an articulating LCD screen that can be positioned at a comfortable angle when using it as a viewfinder and can be protected from from scratches when not in use.

The D5000 also features "date and time" imprinting; each image includes the date and time printed in the lower right corner of the image.

PhotoMed offers the Nikon D5000 as a complete clinical camera system with a choice of of Nikon or Sigma macro lenses and macro flashes.

Added 06/15/2009

The RINN XCP-ORA universal ring and arm positioning system is a three-in-one positioner suitable for correctly aligning RINN XCP Film and Sensor bite blocks. The RINN XCP-ORA design allows dentists to achieve anterior, posterior and bitewing x-ray positioning with only one ring & arm. This reduces the number of positioning pieces in the dental office, minimizes autoclave loading due to a reduced number of positioning devices and simplifies the radiographic alignment procedure.

RINN XCP-ORA One Ring & Arm Positioning System features :

• Patented red, yellow and blue color coding for ease of use
• Light weight construction for patient comfort
• Only two components needed for all anterior, posterior, and bitewing positioning
• Rugged, durable autoclavable construction for low cost per-use
• Compact design is easily stored in drawer
• Raised alignment guides for US and European sized collimators

RINN XCP-ORA One Ring & Arm positioning system is compatible with all XCP film and sensor biteblocks.

Added 06/10/2009

Currently in user testing and scheduled to be available for purchase by the third quarter of 2009, the KODAK 1500 Intraoral Camera features proprietary liquid lens technology that instantaneously focuses like the human eye, as well as the freedom of “Wi-Fi." The camera is engineered to deliver exceptional image quality and ease-of-use.

The KODAK 1500 Intraoral Camera captures still images and video with the highest resolution currently available. True auto-focus of still images and video, elimination of undesired light reflection and automatic adjustment to lighting conditions further optimize image quality. Additionally, the liquid lens allows instantaneous and automatic capture of still portraits, full arch, intraoral and macro views with the help of light-emitting diodes (LEDs) that optimize illumination. These features allow improved visualization of hard-to-see areas including cracks and other lesions and potential oral hygiene issues.

Built-in “Wi-Fi” wireless capabilities provide total freedom of movement without any wired connections between the camera and docking station, resulting in a seamless workflow and user experience. The small docking and charging stations allow for easy installation and use anywhere in the practice, encouraging camera sharing across multiple operatories. The automatic sleep mode and extra battery ensure the camera is always ready for use.(A “wired” version will also be sold, including all the same features and benefits except for wireless communication.)

Still images and live video quickly display on either a computer or video monitors. When used with a computer, images can be stored and managed with KODAK Dental Imaging Software. And when used with a video monitor, images can be saved on memory (SD) card and transferred to a computer for printing and storage. This printing feature is especially useful for supporting third-party reimbursement.

Based on feedback from dental practices around the world, the KODAK 1500 Intraoral Camera incorporates a stylish design that combines with a simple software interface for maximum comfort and ease of use. The compact, lightweight camera is ergonomically designed to comfortably fit the user’s hands, making it easy to hold steady and maneuver inside the mouth—even in hard-to-reach areas.

Added 06/08/2009

The UltraLite CX ceramic-bearing MULTIflex®-compatible highspeed handpiece does not need lubrication, which saves time and money, and eliminates the risk of handpiece lubricants getting on the cavity prep and diminishing bond strength. Two head sizes are available: compact (Model 557) and full size (Model 757).

The UltraLite CX handpiece requires no user lubrication. It features ceramic bearings, which significantly extend bearing life. The company’s proprietary Debris-Shield™ Bearing Shield System minimizes debris accumulation in the bearings.

Lares handpieces feature higher cutting power, compact size, feather-light weight, and an integrated fiber optic handpiece lighting system. The UltraLite CX Handpiece is has 360-degree swivel and push-button bur changing.

Added 06/02/2009

Sirona’s five new starter handpiece kits comprise the company's most popular handpieces including its high-speed air-driven and electric high- and low-speed handpieces. Every kit comes with Sirona’s T1 Spray, giving the dentist the ability to keep their important investments properly maintained. The five new kits come with a variety of handpieces including:

• T2 Racer – a high-speed air-driven handpiece with titanium-plated casing and an ergonomic design shaped to fit the user’s hand comfortably.
• T2 mini – another high-speed air-driven handpiece, similar to the T2 Racer, but with a smaller head.
• T1 CLASSIC S 200 L – high-speed electric handpiece that is ideal for the preparation of fissures (eg, before sealing), the removal of enamel and dentin and the smoothing of cavity margins.
• T1 CLASSIC S 40 L –the low-speed electric handpiece version of the S 200 L.

The New Starter Handpiece Kits include:

The 61 49 715 Air-driven Starter Kit comes with one T2 Racer, one T2 mini handpiece and T1 Spray. Dentists can save 20% for a total retail price of $2,225.
The 61 49 723 Electric Starter Kit comes with one S 200L, one S 40L handpiece and T1 Spray. Dentists can save 20% for a total retail price of $2,575.
The 61 49 731 Air-driven and Electric Starter Kit comes with one T2 Racer, one T2 mini, one S 200 L, one S 40 L and T1 Spray. Dentists can save 25% for a total retail price of $4,395.
The 61 49 756 C8+ Electric Starter Kit 1* comes only with Sirona’s electric handpieces (three S 200 L and one S 40 L) and T1 Spray. Dentists can save 25% for a total retail price of $5,010.
The 61 49 749 C8+ Air-driven and Electric Starter Kit 2* comes with two T2 Racers, one T2 mini, two S 200 L, one S 40 L, one coupler and T1 Spray. Dentists can save 25% for a total retail price of $6,830.

All handpieces included in the kits come with Sirona’s 3-year warranty.

Added 05/27/2009

The Schick CDR Elite intraoral digital x-ray sensor is designed to offer outstanding image quality, an easy-to-use design, and a robust, hard-wearing construction. Its images provide bold bone tribeculation, crisp lamina dura and a clear, clean DEJ .

CDR Elite incorporates Schick's proprietary removable cable technology (introduced with the CDR PlusWire) on all three sensor sizes for a l-step cable-replacement process.

Simple and easier sensor placement, even for vertical bitewings, comes from an optimally located sensor-cable interface and a new color scheme that provides high visibility in the oral cavity.

CDR Elite's Smart Remote System has been developed to allow simple, accurate, in-office diagnosis to ensure peak performance of the entire system.

Added 05/22/2009

ToothIQ Pro is a Web-based interactive patient education system featuring more than 70 3-D animations and 2,000 pages of peer-reviewed content. There is no hardware or software to buy. It includes IQ Consult that allows dentists to email specific content to their patients, complete with animation—to help the patient better understand the value of their services and serve as a component of the practice's risk management strategy. The practice may elect to receive an email receipt when the content you specify is sent, and another when the patient has viewed the content. Servers also log the event, creating a record that the patient has been informed and that they've accessed the information provided.

Added 05/22/2009

Formulated to improve the health of the alveolar crest, Alveol contains the proprietary ingredient PRF (Periodontal Regeneration Factor) that is formulated to both accelerate proliferation of periodonal ligament cells and reduce inflammation. Alveol is said to reduce pocket probing depth and reduce tooth mobility.

Added 05/22/2009

PostPlant is formulated for implant patients to accelerate bone formation. It contains the ingredient K2H that helps calcium promote osteoblastic function and thus aid osseointegration. K2H is a natural ingredient that reportedly has no side effects. PostPlant improves both bone density and implant stability.

Added 05/22/2009

Utilizing controlled three - dimensional ultrasound vibrations for safe and selective cutting, the PIEZOSURGERY surgical unit is designed for a wide range of bone surgery applications, including Osteotomy, Osteoplasty and Extraction in Implantology, Periodontology, Endodontics and Surgical Orthodontics.

Features include MicroMetric Cutting Action, Maximum Surgical Precision, Selective Cutting Action with vrtually NO damage to soft tissue, Cavitation Effect, and intra-operative visibility and a blood-free surgical site.

Added 05/21/2009

The EA-30 electric motor features a petite, lightweight design. It accommodates the new A dec|W&H Alegra gear-driven attachments and is available as an integrated option for the A dec 300 delivery system.

Offering a light, balanced feel similar to that of an air-driven highspeed, the EA-30 covers all general restorative applications from highspeed to lowspeed to prophy. It combines a low noise level with 3 Ncm of torque and 55W of cutting power. It seamlessly integrates into the A-dec 300 delivery system for comfort and efficiency. The simple-to-operate A-dec 300 deluxe touchpad adds precision speed control.

Added 05/20/2009

Alegra handpiece attachments provide independent LED illumination; their on-board generator acts as a self-contained energy source that powers the LED. The system operates completely autonomously and is therefore independent of the motor. This means the attachment can provide LED light even when powered by a non-lighted motor.

It addition to LED light, these robust attachments--WE-99LED G, WE-66LED G, and WE-56LED G--are low on noise. Plus, the highspeeds are equipped with a triple port spray to ensure effective cooling of the treatment area. For added flexibility, Alegra attachments feature an E-coupling, so it is simple to change out attachments accommodating a wide range of working styles.

Alegra features a complete line of mid-priced attachments as well as three new air-driven handpieces.

Added 05/15/2009

The Skinny 2.4 narrow-diameter implant combines a small diameter (2.4 mm) with a universal restorative platform. This allows it to be restored as a conventional diameter implant without new components, instrumentation, or learning curve.

Designed for narrow ridge situations, the Skinny 2.4 is a two-piece implant suitable for lateral incisor cases and other cases where bone volume is compromised. It offers optimal strength and full prosthetic versatility without the need for bone grafting and is well suited for flapless implant placement surgeries. It includes a premounted first stage surgical cover screw.

Added 04/28/2009

Pre-programmed for 7 popular implant systems, the Chiropro L surgical handpiece system incorporates a simple, intuitive interface that is managed by the new control pedal. Other features include customizable programs, an efficient and reliable motor, an innovative peristaltic pump, and a contra-angle handpiece with an exceptionally small head.

The stable, powerful, lightweight MX-LED motor offers ideal working comfort at high and low speeds. Depending on the torque needed, the power is automatically regulated and stabilised electronically. Accordingly, the speed is kept constant throughout the operation. The self-ventilated motor allows LED lighting on the contra-angle with the same luminous intensity at both high and low speeds.

The system offers 8 pre-programmed implant sequences (10 steps each), 1 endo sequence, and 4 dental surgery individual programs.

Added 04/28/2009

The VistaPure system produces two grades of water — distilled-quality water for autoclaves and ultra filtered non-corrosive water for bottles used with dental delivery systems.

The first stage is a prefilter that removes sediment, chlorine, chloramines, trihalomethanes and other contaminants by physical filtration, absorption and adsorption.

Next is the hyper filtration stage where pressure forces the water through a semi permeable membrane, removing contaminants at the molecular level. Impurities such as nitrates, sulfates, heavy metals, sodium, calcium and approximately 95% of other water contaminants are removed and rinsed away from the membrane and down the drain.

The water is then sent to a cartridge that contains both cationic and anionic resins for removing any remaining contaminants by a deionization process.

The final stage is a polishing filter. The finished water is then sent to a 2.7 gallon storage reservoir where it is easily dispensed for use.

The system is a standard feature of Solaris Sterilzation Centers.

Added 04/23/2009

The VistaClear dental waterline treatment system eliminates the need for independent bottles. Offered in single- and multiple-operatory versions, the system is suitable for new office construction, remodels or retrofitting into existing offices. The patented design isolates operatories from other water sources for enhanced infection control. Each system includes backflow prevention check valves.

Added 04/23/2009

The AeroPure vacuum features oil-less dry regenerative blower technology. No water or oil is needed, reducing the environmental footprint and eliminating costly water bills and expensive oil. Described as reliable and quiet running, the AeroPure Vacuum eliminates the need to ever replace oil or filters. Its float technology minimizes the risk that foam will damage the motor. AeroPure has an exceptionally high flow (CFM) at the optimal inches of mercury (in-Hg). Better flow means that the user can move more debris out of the oral cavity. This ensures that you have the right amount of flow in every operatory.

Added 04/22/2009

With a -40şF dewpoint, AeroPure compressors feature extra dryers and filters to reduce the risk of bacteria. With it’s patented oilless rocking piston design, AeroPure requires minimal maintenance and its compressor heads use a proven design with over 15 years of rugged experience in harsh environments. AeroPure’s energy efficient motors offer 2 minute pump up with 25 second recovery time. This ensures that during periods of heavy use, this workhorse will minimize lost flow and keep all operatories running strong.

Added 04/22/2009

The compact, portable Picasso soft tissue diode laser delivers clinical results and ease of use with the portable design. Its 810nm wavelength provides clean cutting and hemostasis in a wide range of soft tissue procedures It is known for precision cuts with gum tissue, eliminating bleeding at the site and reducing healing time. Picasso also can be used to help sterilize canals in endodontics, treat periodontal disease, and aid in tooth whitening. Gingival troughing with the Picasso around your preparation also eliminates the need for retraction cord. Features include:

0.1 - 7.0 Watts
Touch screen interface
Continuous or pulse modes
8 Customizable presets
Adjustable aiming beam
Multiple language menu
Compatible with US and international power outlets; 110/240/ volt compatible
3-year warranty

Added 04/15/2009

Engineered to provide an objective measurement of implant stability, the Osstell ISQ not only measures initial implant stability, but also monitors the development of osseointegration over time. The instrument employs resonance frequency to determine a numerical implant stability quotient (ISQ) that indicates the level of osseointegration and serves as a quantitative baseline for subsequent monitoring; levels range from 1 to 100 and the higher, the value, the more stable the implant.

Osstell ISQ helps the dentist make a well-informed decision about the optimal time to load the implant. By detecting implants that are not performing as expected it also helps avoid failing treatments.

The Osstell ISQ is described as exceptionally easy to use and extremely accurate. It comprises a display unit, a handheld probe, SmartPegs that attach to the implant during measurement, and data manager software. The software which is installed on a PC enables storage, viewing and printing of measurements made with the Osstell instrument.

Added 04/15/2009

The ClikStik holding system can be used with sensors, PSP plates or x-ray film. The ClikStik allows the use of any Bite-Block and Bite piece; anterior, posterior and bitewing, from all manufacturers such as RINN™, Flow™’, Schick ™, Dexis™ and others with one instrument, one ring and one simple rod.

The ClikStik™ is a fully autoclavable, twin head holder that positions the ring as close to the cheek as possible without rod interference for increased accuracy.

Added 04/13/2009

Triotray rigid and accurate posterior impression trays eliminate bounce-back and lock impression material in the side tabs. The trays' sturdy metal frame incorporates side tabs adjust to suit all patients, including those with shallow palate, wide buccal plate or mandibular tori. The thin retro-molar area allows patients to easily close in centric occlusion. Triotrays consistently take successful impressions – saving time and eliminating frustration.

Added 04/05/2009

Henry Schein brand high-speed C-type handpieces offer optimum power with quiet operation, delivering 400,000 RPMs at 32 PSI. The lightweight handpieces are available in standard or push button, for quick and easy bur change. Both types feature a fixed 4-hole connection and are fully autoclavable. Replacing the turbine cartridges is fast and simple.

Added 04/05/2009

Le Petit Masque is a facemask specifically designed to fit small faces. It is 3/4” shorter to eliminate gapping, for a more comfortable, protective fit. Five percent of proceeds from the purchase of the pink-colored mask goes to fund women’s cancer research at Memorial Sloan-Kettering Cancer Center.

Outer layer is fluid resistant, inside is soft, white spunbond. Meets ASTM* F2101-07 Standard as a Low (Primary) Barrier face mask based on fluid resistance, filtration value, breathability and flammability. *(American Society for Testing and Materials)

Added 04/02/2009

Dental marketing expert, Fred Joyal, CEO and Co-Founder of 1-800-DENTIST, has released a new book titled Everything is Marketing: The Ultimate Strategy for Dental Practice Growth. It is available in hardcover or as an audiobook at www.GoAskFred.com store, or as a Kindle download at www.amazon.com.

The book covers a wide range of topics including:
• Why dentistry’s unique business model is such a huge advantage
• How to create an unexpected and unforgettable patient experience
• Why patients leave your practice—and how you can keep them for life
• Proven ways to boost patient loyalty and word of mouth
• Secrets to building a strong (and happy) team that your patients will fall in love with

Added 04/01/2009

The Defend+Plus Sterilization Pouch with Built-In Dual Internal Indicator eliminates the need to use separate indicator strips.

Defend+Plus pouches feature the same superior design and quality construction of standard Defend® pouches, but include a built-in dual internal indicator (Steam and ETO). This allows the user to see that the correct sterilization temperature is reached within the instrument compartment without having to place an indicator strip inside the pouch. The dual internal indicator provides an extra measure of security.

Defend+Plus Pouches with Built-In Dual Internal Indicator are offered in five sizes, packaged 200 to a box.

Added 03/31/2009

DentLight introduces major upgrades to FUSION™ LED curing light with significantly improved functionality and ease of use. The versatile high power portable cordless curing light features a solid metal body design along with focused LED Beam technology that provides a 1500mW/cm2 light beam. Additionally, the light maintains high power over distance for fast, deep and reliable cure.

Key recent upgrades include:

• Unique backlit metal keypad controls with raised ON/OFF key for easy operation
• Interchangeable 360° swivel light probe with 10mm large tip for curing of all materials
• 7-mode LCD digital displays
• Options of tacking tips, lens modules and caps to cure from 3mm to 13mm
• Options to directly mount and charge the light on a dental unit

Added 03/26/2009

Designed for use in both private practice and institutional dental care facilities, the Master 3DS cone beam imaging system offers a new GPU solution--3D reconstruction time improved to less than 35 seconds with even less 3D CT scan time: 15 seconds for normal and 24 seconds for high def.

The field-of-view (FOV) selection provision enables the user to select the optimum FOV size (20x19/20x15 cm, 16x10 cm, 16 x 7 cm) and limits the radiation dosage to only the necessary level for examination contained to the region of interest. For example, the FOV size of 20 x 19cm captures a comprehensive 3D view of the entire oral and maxillofacial anatomy including the TMJ, sinus, and airways on a single 360 degree scan whereas the FOV of 16 x 7cm would capture both mandibular condyle and upper and lower occlusion area of oral anatomy.

EzImplant, the dynamic and efficient 3D image solution, offers comprehensive information for precise assessments, diagnosis, and treatment plans by using the auxiliary functions such as measuring, canal tracing, cross-sectional viewing and implant simulation.

The Master 3D series provides a selection of voxel sizes which improves the overall image resolution. The smaller voxel size (0.164mm) offers the highest image quality while normal voxel sizes (0.3, 0.4mm) are suitable for diagnostic images with less reconstruction time and smaller file size.

With the new Master 3DS, there are 3 types of patient positioning – standing, seated (optional chair), and wheel-chair-confined patient accessibility.

Added 03/25/2009

Equipped with a new generation of CMOS digital sensor, the PaX-Primo digital panoramic x-ray unit delivers diagnostic panoramic X-ray images equal to digital photo quality. Also available is PaX-Primo(i) model with optional ALSA (Automatic Layer Selection Algorithm) functionality to produce optimal digital diagnostic images by using VATECH’s proprietary “Area Adaptive Mode” (AAM) solution. The AAM solution captures and instantly processes multiple oral trough layers during a single panoramic scan, and intelligently reproduces a final diagnostic image by selecting the optimal single layer in different regions of the image to minimize image distortion in every panoramic image taken.

Both models:
• PaX-Primo
• PaX-Primo(i)
include a high resolution 10.4” LCD touch panel for easy operation and simple image previewing. Both units feature compact size, light weight (less than a 4’ cube, and weighing less than 165 Pounds), and ease of installation.

Added 03/25/2009

Compatible with most intraoral mirrors for intraoral photography, the PhotoMed Universal Mirror Handle allows the mirror to be positioned inline with the handle or the mirror can be angled. There is approximately 35° of rotation to allow comfortable positioning for buccal and occlusal views. The handle can be locked to hold the mirror at the desired angle.

The Universal Mirror Handle is available individually to work with existing mirrors or in a kit that includes: (1) mirror handle, (1) adult occlusal chromium mirror, (1) buccal T1 chromium mirror and (1) "O" utility mirror.

Added 03/25/2009

Engineered to cut at speeds comparable to a high-speed handpiece, the Waterlase MD Turbo all-tissue laser operates in a non-contact mode (it never touches the tooth), using laser energy and a gentle spray of water to perform restorations without heat, vibration or pressure.

A contra-angle handpiece with a computer designed optical tip replaces the traditional handpiece and its fiber tip. The optical tip is capable of focusing the laser beam to a 500- or 700-micron diameter spot size, depending on which of two available Waterlase MD™ Turbo tips is used (MX5 – 500 microns, or MX7 – 700 microns). The beam maintains this spot diameter for a distance of approximately 1 3 mm at a distance of about 3 – 5mm from the tip, providing maximum cutting efficiency across that distance, for fast and effective Classes I –V cavity preparations.

Additionally, the Waterlase MD Turbo provides ultra-bright, shadow-free illumination and red aiming beam for enhanced visibility and tractability in the surgical field

Added 03/19/2009

Two new panoramic bitewing programs (BW1 and BW2) are available for the ORTHOPHOS® XGPlus and XG 5 panoramic units and allow the practitioner to take a diagnostic image quickly and easily.

The new bitewing programs provide practitioners with the option of taking an extraoral bitewing image when an intraoral image is difficult or not feasible. The programs are easy to use, and are a low-dose alternative for diagnosis in the posterior and anterior regions.

The BW1 posterior program provides additional diagnostic information compared to standard intraoral bitewings and is a suitable alternative for patients with challenging intraoral anatomy. With the XG 5, both sides are imaged, while the right, left or both sides can be selected on the XGPlus units.

The BW2 anterior program provides a detailed overview image of the anterior area. It can be used with the edentulous positioning guide for anterior trauma patients. It is a lower-dose alternative to multiple occlusal images when focusing on the anterior region.

Added 03/16/2009

The AEU-6000 series of electric surgical handpieces is a more basic version of the AEU-7000E-70V.

Features of the AEU-6000 series include:

• A small footprint with an easy-to-read display and intuitive user interface
• Autoclavable, brushless 40,000 rpm micromotor
• A basic calibration system to compensate for many variables in the implant and endo contra angles at the time of treatment
• Performs the complete implant procedure using a 20:1 reduction contra angle, such as the AHP-85MB and AHP-85MB-C Mont Blanc handpieces. Endodontic procedures may also be performed using an 8:reduction contra angle, such as the AHP-88MN or AHP-88MNP models
• The AEU-6000 series is also compatible with 1:1, 1:2, and 1:5 increaser handpieces for a multitude of dental applications
• In Implant Mode, after drilling, torque control allows the doctor to decrease the speed and increase the torque level for tapping or placement. Once the set torque limit is reached, the motor will stop automatically
• Basic endo functionality with torque in G-cm and auto-stop-reverse
• 0 programmable preset buttons (5 in implant mode, 5 in endo mode) for saving preferred ratio, speed, torque, irrigation, and motor direction settings
• A quiet, fully integrated irrigation pump that has a digital, adjustable flow rate
• Upgradeable software
• Automatic sensing global power supply

Added 03/05/2009

The XD-2 Diode Laser is an exceptionally lightweight, economical, portable laser system. The laser is manufactured by Fotona, the leading European manufacturer of all-tissue dental lasers.

With 7 watts of peak power, the XD-2 can perform procedures such as frenectomies, gingivectomies, crown lengthening, papillectomies, gingivoplasty, treatment of aphthous ulcers, removal of diseased tissue within the periodontal pocket, photocoagulation, soft tissue curettage, and laser-assisted whitening.

The XD-2 is easy to use (there are 4 preset treatment options), and an intuitive operator interface allows the operator to quickly tailor parameters to specific treatments. At just over 2 pounds, the compact, hand-held laser is extremely user-friendly and is an excellent choice for clinicians making their first laser purchase.

Added 03/04/2009

The ergonomic Polaris intraoral video camera features a 330-degree swivel head enabling simple capture of all angles an a rounded, ergonomic design for easy grasping and operation. Polaris’ optical glass lens offers an exceptionally large depth of field--all objects from 4 mm to 25 mm are automatically in sharp focus--as well as sharpness and true-to-life soft tissue color.

Polaris USB provides power and data transfer in a single computer connection. And, Polaris Universal offers multiple connectivity options including USB 2.0, S-Video, and Composite Video Outputs.

Specifications are listed below for both models--USB and Universal:

Polaris USB
Dimensions: 8 7/8" length, 1.08" diameter (handpiece)
Weight: 3.7 oz (handpiece)
Resolution: 640 x 480 pixels
Video Outputs: High Speed USB 2.0, Video
Illumination: Ultra-bright white LED lamps
Image: Normal, not mirrored

Polaris Universal
Dimensions: 8 7/8" length, 1.08" diameter (handpiece) / 5.7" length x 3.8" width x 1.5" depth (control module)
Weight: 3.7 oz (handpiece) / 8 oz (control module)
Resolution: 640 x 480 pixels
Video Outputs: High Speed USB 2.0, Video, S-Video, Composite Video
Illumination: Ultra-bright white LED lamps
Image: Normal, not mirrored

Added 03/03/2009

Best Technology Creates the Best Image

At Panoramic, we utilize the best technologies in our products so that you can create one of the best digital images possible. Our PC-4000 uses proprietary Cadmium Telluride (CdTe) technology to capture images with up to 300% more clarity than the conventional CCD/CMOS digital technologies found in most of our competitors’ machines. The CdTe sensor is more efficient because it minimizes light distortion by directly converting X-ray energy into electronic digital output. The PC-4000’s superior image data selection interface allows you to resolve imperfections caused by poor patient positioning or unclear anatomical landmarks.

Best Service, Best Support

The PC-4000 imaging software is DICOM and TWAIN compliant and compatible with most popular practice management software suites including Dentrix®, EagleSoft®, and PracticeWorks®. The PC-4000 includes a free computer, monitor, and proprietary diagnostic software program, allowing easy integration with your existing computer network and practice management software. Same-day training (either in your office or on the phone and web) will prepare you and your staff to use your PC-4000 effectively and efficiently. The PC-4000 is backed by Panoramic Corporation’s industry leading 2-year parts and labor warranty and free technical support.

With an unbeatable price, clear-cut diagnostic advantages for your patients, and economic benefits for your practice, you cannot afford to pass up the PC-4000 Fully Digital Panoramic X-Ray System.

Added 03/02/2009

Vanish™ XT Extended Contact Varnish is a site-specific, light-cured durable coating that provides an immediate layer of protection to relieve dentinal hypersensitivity. It is particularly helpful for protecting exposed, sensitive root surfaces, especially newly cleaned surfaces following scaling & root planing.

The varnish remains on the tooth for six months or longer and is moisture tolerant, eliminating the need to dry or pre-treat the root surface. Its use requires no rubber dam. Offering fluoride, calcium and phosphate release, the resin-modified glass ionomer formulation significantly reduces dentin permeability by occluding dentinal tubules in-office for immediate pain relief. Vanish XT also protects the tooth surface from acid attack.

In vitro tests conducted with Vanish XT demonstrate that the coating:

• Creates a barrier against demineralization and acid erosion
• Provides protection beyond the coating
• Helps repair demineralized enamel adjacent to the coating by fluoride toothpaste

Added 03/02/2009

Allowing optimal integration of technology for its class and well-positioned to fit small spaces and conservative budgets, the new A-dec 300 system offers customers a mid-level platform choice that’s lower in cost than the A-dec 500®, yet maintains high performance, service, and support.

The A-dec 300 comprises a patient chair, delivery system, light, monitor and assistant’s instrumentation. It incorporates a compact control head that supports two electric micro-motors, integrated floor box, small base plate and dedicated left/right support center.

Other features include an ultra-thin 1.5” (38mm) thick backrest that provides optimal access to the oral cavity, to the 13.75” (34.9cm) to 29.5” (74.9cm) vertical range that allows doctors of all heights to sustain posture and position arms at sides. Traditional or Continental® delivery system options are available and A-dec 300’s modular design allows dentists to choose the options and combinations that best suit individual working styles.

Added 02/27/2009

The DEXcam 3 Intra-oral Video Camera provides highly defined image quality utilizing a seven-element glass optical lens, four bright LEDs and an internal prism for optimal lighting, along with its Sony® CCD sensor. Precision-ground glass optics virtually eliminate image distortion.

Features include the light-weight handpiece that offers maneuverability; the slide focus that allows viewing of intra-oral and extra-oral images without a lens change; and the capture control that freezes the streaming video into a still image with a simple press, then saves the image to the patient record with another press.

DEXcam 3 is ultra portable and easily accessible. The high-speed direct USB connection requires no docking station and quickly and easily disconnects for transfer between operatories.

Added 02/26/2009

The Crescent Premium Memory Bodyrest Pad was developed to soothe patients during lengthy procedures while providing pressure point relief to the body. This pad is a thicker and larger version of the Standard Bodyrest pad and contains a heavier density memory foam. It is available in full-chair and half-chair versions, in teal, gray, and beige colors.

Added 02/25/2009

The new Medium DV (Deep Vestibule) mouthpiece for the Isolite dryfield illuminator allows for more complete tongue retraction and a better fit in a patient’s mouth. Its expanded cheek shield shape provides improved suction that goes deeper into the vestibule. The new design also provides for additional suction capacity within the bite block itself, assuring saliva does not pool behind the mouthpiece.

The mouthpiece features an expanded shape of the tongue retractor for better control of the tongue and a better fit in the patient’s mouth; an expanded shape of the cheek shield for improved suction that goes deeper into the vestibule; and additional suction capacity within the bite block itself, to make certain that saliva doesn’t pool behind the mouthpiece.

Additionally, the mouthpiece sleeve is slightly larger so that it fits on to the Isolite i2 dry — field illuminator control head more easily (reducing the need for Isolite Mouthpiece Lubricant to attach the mouthpiece to the control head).

With the addition of the Medium DV mouthpiece to its product line-up, Isolite Systems now makes available five distinct mouthpieces which are designed to fit patients varying in size — from small children to large adults.

Added 02/25/2009

Built on the KODAK 9000 platform, the KODAK 9500 Cone Beam 3D System enables dental professionals to quickly produce high-quality 3D images, ranging from dual jaw to full craniofacial images, while optimizing dose. It is engineered to produce high-quality, anatomically-correct 3D images down to 0.2 mm voxel (VOlume piXEL) size, for more accurate diagnoses, improved treatment planning and more efficient patient care.

Featuring a user-friendly and stylish design that aids in patient comfort and satisfaction, the KODAK 9500 3D System provides face-to-face patient positioning to accommodate standing or seated patients, including wheelchair patients, of varying body types and sizes. Program selection with pre-programmed settings occurs directly on the system’s intuitive interface, simplifying patient setup and exam preparation.

The system also provides full-featured 3D visualization software designed for the needs of dental professionals. The software is intuitive and easy-to-use, enabling users to focus on diagnosis and treatment. The application includes an implant planning/simulation module and implant library, and will be compatible with third-party implant planning applications. Image output occurs in DICOM formats, supporting flexible output options including printing and customizable report templates.

The KODAK 9500 3D System captures dual jaw (9 cm x 15 cm) or all dento-maxillofacial anatomy (18.4 cm x 20.6 cm) in one acquisition for a wide range of clinical applications. With the additional ability to control patient dose through variable settings of mA and kV, dental professionals can manage the patient dose by focusing on their immediate clinical needs. This enables users to maximize image detail required for the specific application while managing patient dose.

The KODAK 9500 3D System is currently available for purchase in limited quantities in the United States and parts of Europe, with general availability scheduled for Q2 of 2009. In addition to the large-field 3D system, a medium-field option will be sold in the United States—providing the dual jaw imaging program only.

Added 02/24/2009

Crown Seating dental stools are available with medical-grade Silvertex fabric, which uses Silverguard™ technology to control a wide range of odor and stain causing bacteria, including staphylococcus aureus, MRSA, salmonella choleraesuis, and e. coli. Silver ions engineered into the chemistry of Silverguard™ are highly effective against bacteria because they attack the bacteria cell wall, disrupt protein metabolism within the cell, and form complexes with other biomolecules in the cell to alter cell functions. The ions are slowly released out of their inorganic matrix in the presence of moisture. Offered in a wide range of colors, the Silvertex™ fabric stays fresh, lasts longer, and is a natural environmentally friendly bacteria-fighting defense to inhibit odor and bacteria. It is EPA registered and FDA approved.

Added 02/22/2009

Available in styles for for hygienists, doctors and assistants, the Swedish Support Stool incorporates many ergonomic features to improve the posture of the user and alleviate many of the causes of back and shoulder discomfort. The waterfall front, bowl-shaped seat and rib-hugging back are multi-adjustable for a custom fit. Crown Seating provides customization with many styles of casters, bases, cylinder heights, and arms. Hundreds of colors are available in standard medical-grade vinyls, Ultraleather™ premium vinyls, as well as several colors of breathable, natural leather. Introductory retail prices range from $940.00 for the doctor/hygienist stool, Model #C85SD, to $1090.00 for the assistant stool, Model C85SA

Added 02/22/2009

Designed to provide optimal ergonomics and user comfort, the Crown Seating C90SBB Saddle Stool features an adjustable seat and backrest. Popular with smaller-frame users, the saddle-style seats provide a superior positioning of the legs and lower back, compared to traditional-style operator stools. The seat shape is shortened in the front to promote a closer positioning to the patient and the lumbar-style backrest is fully adjustable to allow the user to fully relax and lean back to lengthen and relieve over-stressed core muscles. The stool is available with a wide selection of bases, cylinder heights, casters and fabric choices. The introductory retail price is $775.00.

Added 02/22/2009

The DIAGNOdent caries detection system has been optimized and expanded with the DIAGNOdent Display 2191, a stand-alone display that receives its data remotely from the DIAGNOdent pen and displays them enlarged and distinct.

Measurements are quickly and easily visible to you and your patients. The measured results of the DIAGNOdent pen are sometimes difficult to read, and sometimes they do not lie within the patient‘s line of vision. In these instances, the optional remote display can be used.

By means of an infrared interface, the DIAGNOdent are shown both on the handpiece and the display. It can be set up wherever you and your patients need to obtain clear visual confi rmation that caries treatment or calculus removal is necessary.

Features include:

• Easily visible and readable DIAGNOdent values
• The values are readable both on the display and the DIAGNOdent pen
• Easier to work
• No annoying cable
• Better patient retention
• Useful as a starting point for patient consultation and a patient recall system

Added 02/19/2009

Compact enough for placing on a cart or countertop, the Demolizer II provides a simple, effective solution to biomedical waste management at the point of generation, thereby eliminating the possibility of sharps and red bag biomedical waste being disposed of directly into the environment. With the touch of a button, biomedical waste processed with the Demolizer® II is rendered sterile and non-biohazardous and does not generate hazardous or toxic compounds. The system eliminates waste hauling costs up to 100% with this proven, cost-effective approach to on-site biomedical waste management, It offers low capital expense and low cost consumables, and requires no special facility or electrical requirements . Additionally, it eliminates excess handling of infectious waste as well as the risk of exposure to patients and staff during storage.

Added 02/18/2009

OraVerse local anesthesia reversal agent accelerates the return to normal sensation and function for patients who want to avoid the unwanted and unnecessary lingering soft tissue anesthesia. OraVerse has been proven safe and effective for adults and children 6 and older and weighing 33 lbs. or more. Patients who received OraVerse experienced a return to normal sensation and function in approximately half the time.

OraVerse comes in a standard dental cartridge and is easily injected utilizing the same injection site and an identical technique as that used for local anesthetic. It is used in a 1:1 ratio to local anesthetic.

Added 02/04/2009

The Snapshot intraoral digital x-ray sensor is ready for use just by plugging the USB cable into any computer having a Windows XP or Vista operating system. The sensor is detected automatically and all needed drivers are copied directly from the sensor without user action. This, combined with the absence of a tabletop electronics unit, make sharing the sensor between operatories particularly convenient.

The Snapshot sensor has smart, integrated electronics, eliminating the need for separate boxes limited workspace environments. A convenient wallmounted storage device provides safe, convenient storage.

Virtually every intraoral image can be captured with just one X-ray setting. Snapshot’s wide dynamic range provides superior images of different parts of the dentition without altering the settings on your X-ray device.Snapshot’s imaging software is a sophisticated tool for taking an image series (template). The software guides you through the Full Mouth Series and automatically orients the images.

Two sizes of sensors can be active at the same time, which allows changing between sensors without interruptions.

The sensor design produces up to 20 lp/mm true resolution (26,3 lp/mm theoretical). You get razor-sharp images, with the low noise typical of CMOS technology. A wide dynamic range and an anti-blooming CMOS chip ensure consistently successful images.

Added 01/29/2009

Easy to use and clean, the Alghamix II mechanical mixer for alginates, plasters, silicones and gypsumsincorporates an ergonomic bowl position for optimal operating conditions. A new ABS body structure ensures maximum stability during use. The Alghamix II has 2 bowl rotation speeds (high and low) with an ergonomically positioned switch. The Alghamix II has been designed with a bayonet ring for securing the mixing bowl to the mixer that allows for the use of 350 cc mixing bowl and a new 600 cc mixing bowl. Mixing bowls come in a variety of colors (sold separately) including: gray, orange, green, light blue, blue, white (machine comes with grey bowl). The Alghamix II machine provides the following advantages:

• Reduced air incorporation during mixing
• Homogeneous mixing free from bubbles and lumps
• Constant bowl rotation guaranteed by the two speeds
• Structure and design specifically designed to guarantee maximum stability during use
• Ergonomic bowl position which allows for optimal operating conditions
• Easy to remove and easy to clean bowl
• Colored bowls easily adaptable to clinic colors
• 600 cc bowl for plaster and silicone mixing plate usable for various purposes.
• 3 year guarantee

Added 01/23/2009

Engineered for use with the Zimmer Tapered Screw-Vent® implants, the Zimmer Contour Angled Zirconia Abutment is designed to delivering an exceptional combination of strength, esthetics and simplicity. Like the straight Contour Zirconia Abutment, the angled abutment’s titanium ring provides a stable titanium-to-titanium fit with the Tapered Screw-Vent implant for added reliability.

Angled at 17-degrees, the Zimmer Contour Angled Zirconia Abutment provides a natural looking base for an all-ceramic, cement-retained crown in the esthetic zone. The abutment collar is contoured below the margin to create space for soft tissue without compromising strength or quality. Combined with the highly bio-compatible zirconia material, this provides an ideal esthetic result.

Added 01/21/2009

The new Veraviewepocs 3De imaging system offers digital 3D, panoramic, and cephalometric imaging options; no cassette change is required. This economical model features built-in sensors for all image types designed to save time and protect the hardware. With Ř 40 X H 40 and Ř 40 X H 80 mm 3D fields of view, 3De is suitable for over 90% of all clinical cases allowing for maxillary/mandibular arch diagnosis.

In addition, it offers a “true” panoramic image, not a reconstruction, facilitating insurance coverage. This model offers views with exceptional clarity for general dentistry, endodontics, and implantology.

Added 01/14/2009

This dental camera kit is based on Nikon's 6 mp D40 camera. The D40 dental kit includes Dine's Mini Ring and Point Flash a flash designed specifically for dental photography and the 105mm dental lens with dental standardization guide. The package is suitable for photographing the full range of dental subjects from extreme close-ups of two teeth to anterior, lateral, buccal, occlusal, and facial photography. The package also includes a 1 gig memory card, memory card reader and 18-55mm personal lens. Price, $1495.00.

Added 01/14/2009

Available with or without chips, Puros Demineralized Bone Matrix (DBM) Putty is made entirely from human allograft material. The ready-to-use putty offers excellent handling and time-saving convenience for optimum bone regeneration. Clinicians will benefit from the pre-mixed, moldable putty, which is packaged in a handy dispenser for easy extrusion and/or delivery. In addition, the pliable putty maintains its form and resists migration in a fluid environment.

The regenerative product is sterilized to SAL 10-6 using low-temperature, low-dose gamma irradiation. Furthermore, every donor lot of DBM powder used to manufacture the putty is tested for osseoinductive (OI) potential in an in vivo rat assay, and only lots of DBM powder demonstrating bone formation and no significant inflammatory response are utilized for processing.

Added 01/07/2009

Rinn Digital Sensor Loops are designed to help position digital x-ray sensors when taking bitewing radiographs. With five different sizes to accommodate most brands, disposable Rinn Digital Sensor Loops easily slip over digital sensors to snugly hold them in place, regardless of the type of infection control cover used.

Their small size and light-weight construction make them easy to place and comfortable for the patient. Additionally, their single use design minimizes cross contamination risks. Free samples are offered.

Added 01/07/2009

EDTA Plus with Surfactant is formulated to remove the smear layer, thus allowing penetration into the dentin tubules. The surfactant--17% ethylenediamine tetraacetic acid sodium salt--reduces surface tension thereby improving penetration into the canal. Its light peach color ensures easy recognition during the irrigation procedure. The lubricant is supplied in a convenient dropper bottle for ease of use.

Added 01/05/2009

Orascoptic Laser Loupes combine magnification and laser eye protection for dental professionals who perform frequent laser applications.They are a a lightweight, high performance alternative to heavy clip-on filters, or trying to fit goggles over traditional loupes.

Laser filters are built into both the telescope and the carrier lenses of this loupe. The filter in the telescope is made of high quality glass for superior optical clarity and resolution. The carrier lenses are made of high-index polycarbonate for peak performance and durability.

Filters are available for the most popular laser wavelengths including:
800 - 803 nm
940 - 980 nm
1064 nm
2780 - 2940 nm

Custom manufactured to specific facial geometry, working distance and declination, the loupes are available in two magnification power options.

Added 12/23/2008

ProJel-20 20% Benzocaine topical anesthetic gel features dye-free flavoring and offers no bitter aftertaste. ProJel-20 is delivered in mess-free jars and and convenient tubes to disburse amongst operatories or give out to patients. It comes in Mint, Bubblegum, and Pina Colada flavors.

Added 12/23/2008

DentoGen Calcium Sulfate Hemihydrate is a medical grade bone regeneration material specifically for dentistry applications. It completely resorbs and leaves behind a calcium phosphate based osteoconductive scaffold that enhances bone regeneration.

It is indicated for use by itself in bone regenerative techniques, mixed with other suitable bone filling agents to prevent particle migration in an osseous defect, and to provide a resorbable barrier over other bone graft materials.

DentoGen:
Inhibits non osteogenic cells
Stimulates blood vessel growth in filled defects
Is totally resorbable, safe and osteoconductive
Allows secondary intention healing
Can be mixed with other bone graft materials
Works as a hemostat
Is easy to handle and place and is inexpensive

DentoGen is packaged in patient dedicated 1-gram kits, two to a box. The box includes both regular and fast set liquids. The DentoGen™ powder is pre-packaged in a mixing cup. The regular and fast set liquids are provided in easy-to-use vials. Either of the liquids can be poured drop by drop, as required, from these vials.

Added 12/17/2008

QUIKcaps multi-purpose plastic barriers feature an elasticized edge to slip over a wide variety of equipment. They form a custom-fitting economical barrier over most operatory lights from handle to handle, headrests, handpiece controls, bracket tables and more. Stretches up to 12“ diameter. 400 per pack.

THey are not recommended for use on high temperature lights.

Added 12/15/2008

DENTRIX G4 practice management software offers more than 170 user-requested features. New features include:

Smart Upgrades
Update DENTRIX via the Internet.
Check for updates and install them when needed making updates easier for the office.
Update workstations to stay in sync with your server.

Patient Alerts
Alerts appear on all family members, eliminating the need to re-enter the same note on all family members' file.
Customizable patient alerts that suit the needs of the office.

Insurance Enhancements
Edit the amount of benefit used and the deductible applied for a patient without having to go through an open claim.
Save time when setting up insurance for new patients and when correcting older patients' benefits.
Set the "Signature on File for New Subscribers" as a default in the Office Manager.
Utilize "Release of Information and Assignment of Benefits" for both Dental and Medical insurances globally.

Ledger Enhancements
Search payments from within the Ledger with filters like Check Information, Insurance Carrier, Payment Type, Date, Amount, and Guarantor Enhancements that simplify splitting a payment and posting adjustments which will decrease payment errors for the office.

Chart and Treatment Planner Enhancements
Customizable Procedure Buttons and Button Sets allow the chart to be personalized for specific individuals.
Treatment Plan Consent Forms can now be viewed in the Document Center, saving the form if a case is deleted.
Improved user interface and integration of the Presenter player and the GURU interactive patient education player.

Added 12/05/2008

The Nikon D90 features a small resolution bump (12.3 MP vs 10.2MP), a large, high-resolution LCD screen (3.0in vs 2.5in), Live View (use the LCD as a viewfinder), and sensor cleaning system, Additionally, it offers the ability to shoot HD quality (720p) video clips, useful for creating videos of procedures through microscopes.

The LCD screen grows from 2.5 inches to 3 inches and the LCD resolution increases from 230,000 pixels to 920,000 pixels.

PhotoMed offers the D90 as a complete clinical camera system. For dental photography, the Nikon D90 is available with two lens choices and two flash choices:
- the Sigma 105mm Macro Lens or the Nikon 105mm VR Macro Lens and
- the Sigma EM-140 Macro Flash or the Nikon R1 Macro Flash.
If you choose the Nikon R1 Macro flash, you should also check out our R1 Dual Point Flash Bracket for the R1 flash.

Complete systems (camera, lens and flash) also include a 1GB memory card, USB memory card reader and a professional grade hard case. The case is designed to hold the camera completely assembled and well protected.

The complete camera system is pre-assembled and tested. It is shipped in the professional hard case with custom PhotoMed instructions for clinical use. The complete system also includes unlimited telephone/email technical support and loan equipment support if anything ever needs repair.

Added 12/04/2008

One Spot Portable Procedure Headlight is a 1/2-oz (15 g) spotlight can be affixed to all glasses or loupes, or can be ordered on their own spectacle frame. The exceptionally lightweight, battery powered light produces 12,000 lux at 35 cm distance. Its LED light source provides 100,000 hours of illumination.

The feather-light recharge unit is the size of a matchbox and can be carried in a belt holster or in a shirt pocket.

Added 12/04/2008

Compatible with all manufacturers' digital x-ray phosphor plates, Deluxe Safe'n'Sure Envelopes feature a transparent side and easy-tear opening along their short side for simple positioning, streamlined workflow, and easy plate loading. They are constructed of soft vinyl with rounded corners for patient comfort. Sizes 0, 1, 2, and 3 are available in quantities of 300.

Added 12/04/2008

Both Identic dust-free alginate impression material and KromaFaze dust-free color-changing alginate impression material now are offered in packaging that incorporates a pre-measured volume of alginate for a single impression along with a water measure integrated as part of the package, eliminating the canister, scoop and water vial. The Singles packaging is convenient, easy to use and ensures consistent mixes every time.

Added 12/04/2008

The Endo DTC-2 Electronic Endodontic System is fully programmable with five memory locations. Saving customized settings is simply achieved using the front panel controls. The DTC-2 allows for customized naming of presets that are displayed on the LCD screen. The Auto-Stop-Reverse feature automatically reverses the direction of file rotation when a defined torque level is reached - reducing the occurrence of file breakage while lessening procedure time. The Endo DTC-2 also features an integrated calibration system to give the highest measure of accuracy and consistent operation.

Features include:

Torque is expressed in gram-centimeter units - not arbitrary percentages
Compatible with all rotary Endodontic files
Auto-Stop-Reverse feature
Aseptico's new AE-225-30 autoclavable brushless micro-motor; more reliable than brush motors, greater range of torque and better control of speed and torque than stepper motors
Speed range of 300 to 30,000 RPM
Full range of handpiece ratios supported-- 1:5, 1:1, 4:1, 8:1, 16:1, 64:1
Fully autoclavable motor/cable assembly with easy-connect to console
Automatic calibration tests both the motor and handpiece
Outstanding torque
Backlit LCD provides RPM, handpiece ratio, torque settings, and names for the built-in endo file library
Recommended Handpieces: AHP-88 and AHP-88MP 8:1 mini-head endodontic handpieces
Includes on/off footswitch
AE-70VE Multi-function foot control available

Added 12/04/2008

DynaBlast is a composite graft product that combines osteoinductive and osteoconductive elements in a proprietary, reverse phase medium. It has :

Demineralized bone, which stimulates new bone growth, and

Cancellous chips, which provide a natural structural scaffold to encourage the attachment of osteogenic precursor cells

It comes in paste or putty form.

Added 11/25/2008

Comprising the PrimaSolo® One-Piece or PrimaConnex® Two-Piece Implants, the Prima Implant System offers exceptionaly clinical flexibility in a single implant system. I also incorporates aa streamlined surgical kit and an array of advanced features and restorative options.

The PrimaSolo One-Piece Implant consists of a threaded, tapered implant and integrated, gold-colored abutment, which is placed in a single-stage procedure.

The PrimaConnex Internal Connection Implant consists of threaded, tapered and straight implants with TiLobe™ Technology, a proprietary six-lobed internal connection. It is inidicated for support of cement-retained, screw-retained or overdenture restorations to restore chewing function in partially or fully endentulous patients.

A wide selection of lengths and diameters are available.

Added 11/25/2008

Suitable for sawing, milling or chiselling, theIMPLA NTCENTER is engineered for all surgical procedures – from implantology to periodontal therapy. It combines two drive units with three modes of operation. Incorporating piezoelectric ultrasonic technology and a powerful micro-motor, the system can perform precision cutting with maximum control.

The IMPLANTCENTER™ combines a Newtron™ ultrasonic unit and the high-performance micro motor, I-SURGE™ – to provide a wide indication spectrum. This multi-functional unit combines all the advantages of the proprietary “Cruise Control System™” (frequency tuning, push-pull and feedback system) with an excpetionally high torque range. Depending upon clinical requirements, the programs “Piezotome™” (modulated frequency amplitude), “I-SURGE™” (induction motor) and “Newtron™” (constant frequency amplitude) provide independent control of irrigation, ultrasonic force, rotational speed and torque.

Added 11/25/2008

The VersaWave Specialty Er:Yag all-tissue laser combines functional VersaWave technology and user defined features.

Applications include:

• Sucular debridment and removal of diseased tissue
• Osseous recontouring, grafting, etc.
• Major soft tissue removal and modification
• Implant site preparation and maintenance
• Smile line procedures including closed flap crown lengthening with predictable soft tissue modification
• Abfractions, under crown caries and more
• Laser assisted canal debridement and preparation
• Apicoectomy exposure and treatment
• Minimally invasive cavity preparation
• Gingivectomies
• Operculatomies
• Tissue removal and more...

• Precision laser fiber tip and ergonomic design handpiece design deliver consistant performance for truly exceptional surgical results.
• An intuitive control panel with LED readout and procedure specific presets make setup and on-the fly adjustment safe and easy
• Easy to access integrated Trutest® fiber calibration port ensures consistent output power for consistent results.

Added 11/19/2008

The “Exclusive” Rear Cabinet from Sirona by Kappler is part of the “Exclusive” line of operatory furniture designed to provide ergonomic functions and traditional features at a competitive price.

The “Exclusive” Rear Cabinet comes with sliding work surfaces for both dentist and assistant, accommodating both left- and right-handed practitioners. Suitable for two- and four-handed dentistry, it allows various organization methods, including tub and tray systems. The “Exclusive” Rear Cabinet permits the incorporation of a CPU in the upper section, electrical outlets, flat-screen monitor, USB outlets and any required peripheral equipment. This allows for the easy integration of new technology and high-quality instrumentation.

Added 11/12/2008

Providing integrated LED illumination with a color temperature of 5500K, the A-dec|W&H Synea TA-97LED highspeed air turbine handpiece is described as light, comfortable, balanced, powerful, and quiet.

Features include:

• Smaller mini-head (10 mm diameter) for an exceptional view of the treatment area
• Innovative LED lighting that lasts up to 10 times longer than traditional incandescent bulbs
• Lightweight at only 40 grams (1.4 ounces)
• 17 Watts turbine power with quiet operation (59 dBA)
• Penta Spray (5-port) for efficient cooling and a clear view
• Sealed head with push-button chuck
• Smooth-rolling swivel connection (RQ‑24 Roto‑Quick) for 6‑pin tubing
• 45 Psi (3 bar) recommended air pressure

Added 10/30/2008

CAESY Enterprise 7.0 is the newest version of server-based patient education software for both operatories and the reception area. It includes more than 80 new and updated presentations , one which profiles Full Mouth Debridement and Prophylaxis, and others, including:

• Sedation Options in Pediatric Dentistry
• Invisible Braces presentation in the Orthodontics section
• Thin Veneers video in the Esthetic Dentistry section
• Nine new topics in Dentures
• Oral Conditions section, including a Frenectomy segment
• Hard and Soft Tissue Lasers in the Technology section
• Digital X-ray, Pre-Meds and Bitewing Digital modules in the Initial Visit presentation

All CAESY presentations are also available in Spanish, and seamlessly integrate with Windows Vista, XP and 2000 operating systems.

Added 10/24/2008

Requiring no contract fees, the iPAGER easy-to-use communications device fits comfortably on a belt or desk top.

It is completely programmable for all members of the dental team in the practice. For example, if a specific staff member is needed in exam room #3 to take a x-ray, simply scroll through the staff list for the desired staff member, enter the room number, enter the action needed, and hit “OK”. The page is sent within one second. The staff member has the option to receive the page silently, vibrating, audibility, or a combination.

Other conveniences include a countdown timer. When not in use, the device shows the current time. Additionally, the iPager with Intel-i-page automatically learns individuals' paging habits and presents the most frequently paged staff member.

The iPager saves time, by minimizing the number of necessary thumb strokes. The iPager ‘s two-way communication gives the user flexibility to send and receive messages from anywhere in the office. This wireless system does not use any satellites, cell phones, computers, or wall mounted units. Every office has its own interoffice network.

The iPager is FCC approved and operates safely in the office environment.

Other unique features include rechargeable batteries with a docking station for recharging, one hand operation, a belt clip that can be used as a desktop stand, and an Emergency Page feature that allows the user to make an Emergency Page by just pressing one button. Each iPager can be programmed with your own unique acronym or initials.

With a range that covers most size offices, the iPager can be setup and operating in one day, no installation fees. In the event an extended range is needed, an ipager unit can utilize a repeater function that is available. Any ipager unit can be made to be a repeater.

Added 10/23/2008

The Wingers-V vertical bitewing sensor holder features a small insertion slot on its tab. The slot allows the attachment of an integrated (single piece) x-ray, aimer ring and bar. The device is made from a super soft, disposable, biodegradable material, making the holders economical, easy to use, comfortable for patient and environmentally friendly.

It is suitable for the bi-secting angle or aimed techique and ensures the capturing of an excellent image with maximum patient comfort.

It is available in two sizes to fit most sensors currently on the market: Large, #088-138 or Small, #088-136.

Added 10/22/2008

The Xpaper PDF Digital Writing Kit creates and captures written materials electronically. It is particularly suitable for Patient Registration,Patient History Forms, Laboratory Forms, Patient Charts, and Insurance Authorizations.

The system, priced at $399.00, naturally records handwriting on any document or form, instantly creates searchable PDFs upon docking and automatically controls where the information will be sent, stored, managed or processed. It works with documents printed from any Windows application including desktop PC software as well as Internet-enabled applications. Digital copies are created in the common PDF format, so they are easily used with almost any information system.

The Xpaper PDF Digital Writing Kit includes a digital pen based on Anoto digital pen and paper technology, the Xpaper PDF Print Driver, Xpaper Manager and the PaperView Assistant.

Xpaper PDF is easily configured for networked environments. Documents can be printed on any computer, written upon with multiple pens and then docked at any other computer. Handwriting is automatically updated on the digital copies so it always matches the physical paper. Additionally, documents can be configured at print time to automatically route to certain locations via email or file storage. Upon docking of the pen, users can automatically trigger applications to manage the information.

Added 10/21/2008

SecureDentalForms.com is designed to enable dental practices to transition to a paper-free environment. SecureDentalForms enables patients to fill out necessary forms, from new patient registration all the way to medical and prescription history, in the convenience and privacy of their homes or offices. These forms are customizable to fit the dental practice’s philosophy and branding. This information can be used stand-alone or bridged/integrated with existing practice management software.

SecureDentalForms.com is safe and secure. All patient information is password protected. All transmissions that include patient information are encrypted. SDF servers are positioned in a hardened data center.

In addition to online forms processing, The Virtual Practice Assistant enables the dental practice to utilize one software solution that will provide online appointment confirmation, recall reminders, marketing solutions, and more. SecureDentalForms.com has extensive alerting and reporting features. The alerts will notify the patient of any necessary documentation that needs to be finished or updated prior to upcoming appointments. This not only ensures up-to-date and accurate information from your patients; it also significantly reduces the burden of front office staff.

The Virtual Practice Assistant will help the administrative staff manage a variety of items, from medical and prescription updates to annual insurance updates, which need completion prior to the patient’s dental visit.

Added 10/21/2008

The GENTLEray 980 Premium water-cooled, micro-pulsed diode laser features GENTLEpulse Technology for a high level of soft tissue precision. It reduces thermal stress and virtually eliminates tissue charring and allows for minimal post-operative discomfort.

Other features include:

Higher Peak Powers – fast cutting results in less treatment time for doctor and patient
Water Cooling Handpiece - provides maximum cooling and irrigation to tissue, minimal post op discomfort
Variable Pulse - further refinement of energy to tissue
Sterilizable Fiber – multiuse without loss of laser energy to tip
Color Touch Screen – clearly defines procedures, easy to read at a glance and can be touched with a wet glove
On-board Tutorials – preset with 28 procedures, allows the operator to use the laser with confidence

The small, portable diode laser can be used for a wide range of surgical, antibacterial and laser whitening procedures. It carries a 2-year standard warranty.

Added 10/14/2008

GENTLEmini LUX 4500B high speed handpiece. The GENTLEmini LUX 4500B is designed to complement the GENTLEsilence LUX 6500B, only with a smaller head to further address the issues of patients who have difficulty opening their mouth wide for full oral access. The GENTLEmini operates at a quiet 59dB and offers 17 watts of power. The miniature head and KaVo’s patented handpiece knee angle combination provides improved access to difficult to reach areas. The three-port water spray ensures complete cooling of the bur. The durable hygienic Plasmatec coating improves tactile feedback and user comfort. The GENTLEmini LUX 4500B features KaVo’s cellular optic glass rod with a 5-year warranty on the rod. KaVo’s automatic drive air adjustment extends turbine life. The GENTLEmini fits onto any existing manufacturer’s fiber optic tubing with the MULTIflex quick connect coupler. When maintained with KaVo’s QUATTROcare Automatic Handpiece Maintenance System, the GENTLEmini LUX 4500B features a 2.5-year warranty. The standard warranty is 2 years.

Added 10/14/2008

CAESY DVD 2009 is the latest version of patient education software for operatories and consult rooms to explain diagnoses, procedures, alternatives and post-op instructions. CAESY DVD 2009 contains more than 25 new and updated presentations.

With 23 updated presentations, CAESY DVD 2009 now contains a more comprehensive Hygiene section with new modules on both Full Mouth Debridement and Prophylaxis.

In addition, the CEREC® CAD/CAM presentation has been updated with an informational video of the CEREC MC XL milling unit, and the Sealants feature has also been modified.

A new presentation to CAESY DVD 2009 is a Pediatric Dentistry segment featured on its own DVD, resourceful for educating parents on their children’s procedures. Additional new segments profile Perio Maintenance, Nitrous Oxide, and Sedation Dentistry, a topic about which many patients are currently seeking more information.

Added 10/10/2008

The 2.9mm diameter MDI Hybrid Implant is especially suited for patients with limited interproximal space or softer bone. The Hybrid is a one-piece, cost effective, minimally invasive implant with designs for fixed and removable cases.

Both O-ball and tapered abutment styles are offered, as is a full complement of instruments and accessories..

Added 10/10/2008

Philips Lumileds announced today that Gnatus has released a LUXEON-based operatory light that incorporates solid-state lighting technology. The Gnatus Dental Lamp LED Plus overcomes the inconveniences associated with conventional halogen models, including short bulb life, high power usage and spillover light.

Benefits of the light include:

• Exceptional brightness
• Exceptionally long life
• Significant reduction in power consumption
• True white light, improving diagnosis and shade matching
• Reduced heat output
• No peripheral light shining in patients’ eyes
• Small, sleek design enabled by eliminating the need for large reflector

The illumination from LUXEON LEDs also has less effect on curing light resins, giving dentists more time to do restorative work before the resins harden.

Added 10/10/2008

The Oralase low level laser device is engineered to rapidly and simply provide drug-free solution to reduce or eliminate pain and accelerate soft and hard tissue repair. The ergonomically designed portable Oralase provide low-level laser therapy (LLLT) to effectively control pain and decrease swelling from invasive dental procedures as well as stimulate healing.

LLLT uses a specific type of light to penetrate the skin's surface and underlying tissues to stimulate the body's natural repair processes. The result is faster healing and reduced pain, swelling and inflammation.

The lightweight ergonomically designed hand-held unit has a built-in rechargeable Lithium-Ion battery. It incorporates a GaAlAs 200mW infrared laser diode with visible LED guide light.

Added 10/06/2008

ADSTRA Charting Treatment Planning and Charting Software is now available as a stand-alone, after more than six years of being available only as a module (add-on) of ADSTRA’s practice management software. The Charting program integrates seamlessly with ADSTRA CLAIMS PLUS™ free management software program, which allows users to submit billing information electronically to Emdeon (formerly WebMD).

The comprehensive easy-to-use software program allows users to create and manage odontograms. Dental charts can be created for examinations, for completed treatment, and for planned treatment. There are four views of the chart: maxillary, mandibular, buccal, and palatal-lingual. The charting tools are grouped by type: general, periodontal, restorative, and endodontic. Multiple charts can be opened at the same time and pockets and recessions are represented graphically. A number of reports—or the whole chart as it’s viewed—can be printed.

ADSTRA Charting offers an array of tools for charting tooth conditions such as missing teeth, un-erupted teeth, partially erupted teeth, tooth rotation, impacted teeth, drifted, tilted, extruded, submerged, decalcification, hypercalcification, loose contact, open contact, root canal treatment, apical area, retrograde filling, pins, posts, root caries, complete crown, 3/4 crown, extraction needed, sealants, veneers, cavities, fillings, and many more. Users can set their own preferences for general chart, periodontal chart, restoration materials, and the connection between procedures and tools. Users can also define exam templates and incorporate them into the patient’s chart. Extra-oral examination and occlusal examination are built-in features.

The program also includes the ability to input, store, and review measurements for periodontal readings. Users can measure and enter gingival recession and pocket depths, and chart bleeding, suppuration, furcation, blunted papilla, cratered papilla, erosion, attrition, abrasion, and mobility. For charting plaque, a special surface map appears. Users can compare exams for values or changes in pockets or recessions, and calculate indices.

Added 10/02/2008

Anatomically-shaped Fast Dams are designed to provide a superior means of maintaining a dry quadrant field. Continuous aspiration is achieved by means of 17 suction holes along the perimeter, eliminating the need to change out saturated cotton balls while retracting the cheek and tongue.

Fast Dams are also suitable when applying sealants or when conventional rubber dam is too cumbersome.

Its collapse-proof plastic construction and molded anatomical shape stabilize the Fast Dam’s position. Fast Dams fit into all standard saliva ejector valves.

Added 10/01/2008

Designed to create an integrated operatory solution, the Renaissance Collection of dental furniture incorporates an array of innovative features that improve in-procedure movements, enhance access to technology, and optimize storage to improve operatory ergonomics and efficiency.

Examples include drawer systems that slide into dentist’s or assistant’s reach and purposeful, ergonomic storage of barriers (jointly developed with Kerr TotalCare). Numerous electrical, USB and air/water connections are located where needed to improve in-procedure ergonomics. Soft-close drawers and doors eliminate harsh closing sounds and thus contribute to a harmonious dental practice.

This series of premier dental furniture offers highly differentiated, beautiful aesthetics and state-of-the-art functionality--soft, rounded surfaces, accented lighting and high quality and craftsmanship.

Added 09/29/2008

360imaging Dental 3D CT digital lab services now include 360client, a software program that facilitates secure, HIPAA‐compliant sending and receiving of image data. The 360assist feature allows the digital lab technicians to assist with patient positioning, image filters, image reconstructions, and file management to help ensure that dentist are obtaining the clearest possible CT scan image. With 360client™, it's easy to keep patient digital files organized within a single program. Dental offices can share the Results folder on their network so that all of the computers in their office will have access to their patients' digital files.

The service allows the dental practice to maintain an encrypted link to the 360digital lab so that an image can be uploaded at any time. Once the case workup has been completed, the practice computer receives the finished case through the 360client software automatically and the patient's name shows up in bold to indicate that a new case is ready to review.

When a patient's images are ready to send, click "Create Order" in 360clientTM and fill out the on-screen form. 360client will encrypt the form and the images and upload them immediately. When ready to review the completed case workup, just click the "Results" button in 360client.

360imaging services include In‐house Radiology Reports, Image Modeling to most popular 3D software (SimPlant, Nobel Biocare, Facilitate, Keystone, Dolphin, iDent, etc.), Customized Treatment Planning, Ordering and Quality Assurance of Surgical Guides, and Secure, encrypted, HIPAA ‐ compliant transfer software.

Added 09/22/2008

The Helios 3000 LED Operating Light features proprietary color mixing LED technology that delivers a precisely calibrated 3 inch x 6 inch light pattern for optimal illumination of the oral cavity.

Using advanced LED light technology, the Helios 3000 LED Operating Light provides benefits such as a NO-CURE composite setting, push button 5000° and 4200° Kelvin settings, multiple intensity options, precise shade matching capabilities and nearly zero radiant heat emission. The conservation of energy and illumination of LED’s provides an exceptionally long life expectancy. By reducing the amount of wattage used to power the Helios 3000, energy conservation of approximately 70% is accomplished. This conservation accounts for a significant amount of cost savings on an annualized basis.

Available in six mounting variations: Track, Ceiling, Cabinet, Wall, Post and Ellipse Mounted, the Pelton & Crane Helios 3000 LED Operating Light provides advanced positioning capabilities and enhanced ergonomics for precise and efficient illumination of the oral cavity. Additional features include:

• Long depth of field generated within 18 inch to 36 inch range (factory calibrated at 27 inch)
• Adjustable power sensor for automatic control of system on/off functions
• Forced air convection fan eliminates nearly all radiant heat
• 40°C temperature regulated LED’s for consistent light intensity output
• Approximately 70% less energy consumed vs. standard halogen operating lights
• Minimum 30,000 hour life expectancy (10 years)
• Smooth surfaces and handles for easy asepsis and disinfection
• Vibration and shock-resistant
• Dual membrane touch pads
• Third axis rotation
• Spring Flexion Technology – flex arm range of movement travels up to 40 ° above and below horizontal and up to 27 inch vertically
• Mounting variations include ceiling, wall, cabinet, track, PMU and ellipse
• One year warranty

Added 09/19/2008

Compatible with Satelec's Piezotome™ and ImplantCenter™ devices, this kit of six ultrasonic surgical tips has been specifically developed for extractions (total or partial): avulsions, hemisections and root amputations. Features include:

Ease and speed: the slimness of these tips associated with ultrasonic technology facilitates their access inside the desmodontal space;

Surgical safety: With the selective cut, tips are inactive on soft tissue and sensitive anatomical components. Without any inertia, the regular to-and-fro movement decreases the risk of lesions on adjacent teeth and roots. The use of this kit will also provide benefit to patients who will experience: - swift and less traumatic treatment that respects the alveolar plate; - less post operative pain.

This kit consists of:

Five Ligament Cutting tips intended for syndesmotomies and periradicular osteotomies. With differing shapes and orientations, they address the morphological constraints without damaging neighboring tissue and anatomical elements. Combined with the action of ultrasonic micro-oscillations, they achieve, with just a simple sweeping movement around the tooth, detachment of the periodontal ligament in order to facilitate avulsion of the tooth outside the alveolus.

One Ninja™ tip, with double saw-tooth edges, developed especially for hemisections and root amputations, this tip is also recommended for sectioning impacted teeth. The Ninja’s selective and accurate cut allows the practitioner to achieve faster and less invasive surgery.

Added 09/17/2008

Designed to eliminate the risk of loose prosthetic screws, PerioSeal implants offer a collet locking connection that rigidly secures the abutment in the implant, thus eliminating micro-motion and subsequent screw loosening.

The implant is constructed with a conical opening above an internal hex; the interior of the implant is not threaded. The abutment is held in place by a locking mechanism that expands when a screw inside the abutment is tightened. This proprietary feature eliminates the possibility of broken or stripped screws preventing the use of an implant. If a problem occurs with a screw in the abutment it can be easily removed and the implant will not be damaged.

The abutment locking feature is a sliding nut that moves when the screw in the abutment is loosened or tightened. It is important to make sure the screw is not tight (locked position) prior to insertion of the abutment or it will not go into the implant.

Healing caps, ball abutments, provisional and cone top abutments use an expanding nut to lock the component into the implant.

The interior of each PerioSeal Implant has six precision index features that allow repeatable placement in sixty-degree increments. The index corresponds to the locking nut on the abutment, and the hex feature prevents the rotation of the abutments.

The Implant Abutment Junction (IAJ) of the PerioSeal Implant System is hygienically closed. The prosthetic margin of the crown is placed apical to the IAJ; thus, the IAJ is captured within the cemented crown eliminating the possibility of harboring bacteria within the IAJ. By capturing and sealing the IAJ within the crown, PerioSeal Implants eliminate a potential haven for organisms adjacent to healthy bone and soft tissue.

Added 09/15/2008

Requiring no cables, cords, or similar connections, the HEINE 3S LED UNPLUGGED HeadLight incorporates a rechargeable headband battery for unlimited mobility.

Weighing 6.3 ounces with balanced weight distribution, the compact headlight is exceptionally comfortable to wear. Features include:

• Exceptional brightness and 6,000 Kelvin color temperature
• Shadow-free coaxial illumination
• LED charge status indicator showing remaining operating time
• Can be charged by wall or plug-in transformer
• Direct operation possible while charging through the use of the mobile plug-in transformer.
• Charging time 2 hours.
• Operating time 2 hours.
• Intelligent charging system--Automatic changeover from operating to charging mode (in the wall unit).
• Top safety standards--Integrated charge and performance checks during operation. Lithium polymer technology (selected non-flammable materials).

Added 09/15/2008

The FRIOS Unit S/i implant surgery system features four preset programs can be called quickly and easily step by step - using the footswitch or directly from the device. The programs can be modified to meet specific requirements and the latest selected setting is automatically saved.

Precise access: a fifth program key allows you to control the thread-cutting function without changing the contra-angle handpiece - for a smooth surgical process.

Best overview: the large, high-contrast display shows you everything that is happening - you monitor the speed and the torque setting.

Using the footswitch: all functions from switching programs to clockwise-counterclockwise to starting the irrigation pump can be selected during surgery with the ergonomically designed footswitch. This leaves your hands free and you can work without requiring a sterile assistant. Controlled irrigation: the new pump system controls the irrigation flow accurately and evenly in three stages - 65, 80 or 100 ml/min. The factory setting automatically stops the irrigation flow when the 'implant placement' program is selected. This prevents unwanted wetting of the microstructured implant surface by the irrigation fluid.

Controlled power: the brushless, maintenance-free motor runs smoothly and quietly with optimum, efficient power transfer - easy to handle with its ergonomical design with a practical bracket on the stand.

Simple hygiene: motor, cable, stand and handpiece bracket can be sterilized at 135 #C.

Added 09/11/2008

Sourced from bovine pericardial tissue, CopiOs Pericardium Membrane provides the characteristics of natural tissue, coupled with the ease-of-manipulation, conformability, and strength required for successful surgical outcomes.

The CopiOs Pericardium Membrane offers excellent tissue compatibility, and is appropriate for Guided Bone Regeneration procedures such as block graft coverage and large ridge augmentation where a malleable, drapeable, and long-lasting barrier is desired. Product quality is preserved with the proprietary Tutoplast process, which thoroughly removes unwanted impurities while maintaining the tissues’ natural qualities and biomechanical stability.

Customers who have been unable to obtain the Puros® Pericardium Allogaft Membrane due to limited quantity and high demand will have access to the CopiOs Pericardium Membrane to meet their clinical needs. Both products undergo the Tutoplast preservation process and consist of pericardial tissue; however the Puros membrane is sourced from human donor tissue while the CopiOs one is derived from bovine (i.e., cattle) tissue.

CopiOs Pericardium Membrane is designed to work seamlessly with Zimmer Dental’s Puros family of bone grafting products.

Added 09/10/2008

Patterson EagleSoft Version 15.00 clinical and practice management software offers new and enhanced features are based on feedback from current Patterson EagleSoft users.

Patterson EagleSoft practice management software is now free to new users, and the imaging software may also be obtained at no cost with a qualifying digital technology purchase.

New to Patterson EagleSoft Version 15.00 is the ability to print CAESY patient education literature automatically during the patient walkout process after a service procedure code is entered. Built directly into Patterson EagleSoft and not requiring a separate CAESY system, this tool allows dental professionals to ensure that their patients have applicable information regarding post-op care recommendations before they leave the practice.

Additional Features of Patterson EagleSoft Version 15.00 include:

• View Production Goals—Users are able to view actual production numbers against production goals for each day in the Month-at-a-Glance calendar.
• OnSchedule Notes—This feature allows users to make notes within the practice schedule as they pertain to appointments, patient requests, and staff meetings and needs. Pertinent notes appear each day on the schedule.
• Insurance Changes—When employer or insurance information is modified, a note appears in the System Activity Log to record what was changed, when, and by whom for the software user’s records.
• Chart Update—Users can quickly and easily track the status of patient treatments by color-coding the chart to represent “walkout” and “rejected” services.
• Lab Tracking—Practices can track cases sent to the lab and take notes with an expanded description field. An AutoNote button has also been added for additional convenience.

Added 09/10/2008

The TwinPower Turbine Mini handpiece combines up to 18 Watts of power and a compact 10.6-mm (height) head. This extremely small design offers exceptional access and visibility without sacrificing power.

This mini-head handpiece is engineered to offer cutting efficiency equal to (or greater than) other standard sized heads. Its double-impeller design delivers constant torque, even under high load conditions.

Other features include zero suck back in the air line, rapid braking within 2 seconds, glass rod optics, and direct connection to other major handpiece brands.

Added 09/08/2008

ASI’s titanium IrriVac root canal irrigation instruments have simultaneous suction and irrigation for improved, thorough cleaning and disinfection of canals. The "over-the-needle" suction tube allows placement of an irrigation needle into the canal, and while the irrigant is dispensed, it is suctioned off at the same time. The additional turbulence and generous amounts of irrigation that can be easily dispensed, offers improvements in cleaning.

The IrriVac is available in both a positive needle pressure version and a negative pressure version. An ideal complement for use with ASI’s Micro Evacuator for final rinsing, evacuation and drying, the IrriVac™ is an upgrade to ASI’s Micro Irrigation System and can be upgraded for one or more handpieces or select a combination such as one standard for EDTA, one positive pressure IrriVac for dispensing sodium hypochlorite and gross material removal and one negative pressure for final cleaning and irrigation with sodium hypochlorite.

IrriVac™Negative Needle Pressure Dispenses solution through the tubing funnel onto the needle and then as it flows down into the canal is safely suctioned up through the needle and removed. The process of pulling irrigating solution down into the canal removing through the end of the needle can provide improved cleansing and disinfection of the apical portion of the canal.

IrriVac™ Positive Needle Pressure Dispenses solution through the needle while the suction funnel suctions off spent irrigating solution from the top of the access as the solution flows upward within the canal.

Use ASI’s Micro Evacuator for fast final rinsing and drying. Just insert any standard needle onto the Micro Evacuator for quick evacuation of canal spaces. Titanium body and inert Luer type connector allows use with all standard disposable Luer lock needles and is unaffected by harsh irrigants, including bleach. Fits standard 7/32" saliva ejector tubing for connection to a solids trap on your assistants package or as an integrated option on your ASI delivery system.

Added 08/29/2008

KOMET USA has introduced tungsten carbide instruments designed specifically for use when intraoral adjustments on titanium abutments are necessary to achieve optimum restoration positioning.

The burs' coarse, cross-cut toothing are specially developed for intraoral preparation of titanium, and cuts tough titanium without clogging.

The burs effectively work on titanium abutments and should be followed by a matching finishing bur, which are identified by its red ring.

Shaping burs are identified with a golden shank and a “G” in the reference number, and come in three different sizes: H856G.314.016/018/020, H847KRG.314.016/018/020 and H379G.314.023. Finishing burs are also available in three different sizes: H375R.314.016/018/021, H336.314.016/018/021, and H379.314.023.

Added 08/26/2008

Written, directed, and narrated by Dr. Stanley Malamed, 2-DVD Emergency Medicine in the Dental Office interactive training program presents 14 potential emergency situations that arise in dental offices and demonstrates how to manage them. The program incorporates high-definition 3D animations and compelling dramatizations. Among the topics covered are cardiac arrest, seizure, and allergic reactions. The program is suitable for in-office or take-home instruction and qualifies the participant for 7 hours of continuing education credit.

Added 08/25/2008

The E-Prop an oral mouth prop is designed to hold a disposable evacuation tip. It is completely adjustable and can be positioned to eliminate liquids from pooling in the patient’s mouth.

The E-Prop ™ was developed to save time and money by providing a cost-effective solution to traditional hand-held liquid evacuation. The patent pending design allows for a standard disposable evacuation tip to be placed in the mouth prop reducing the need for labor intensive hand held suction. In addition to making the patient more comfortable, it allows the dental technician to better assist the dentist.

The E-Prop is an FDA registered Class 1 Medical Device and is made using state of the art FDA approved plastics that contain no latex. The E-Prop ™ is fully autoclavable and will stand repeated use.

Added 08/22/2008

The NuTorque programmable electric handpiece is engineered to provide maximum control with minimum effort using NuTorque’s unique easy-to-use touch screen display.

The display includes numerous options, including three general procedure memory presets for common procedures such as cavity preparation, caries removal, and polishing; a speed/RPM display; a fiberoptic light; an on/off water spray; and an attachment gear ratio indicator. The main display also provides a detailed and customizable Set-up Mode and ENDO Mode, which includes five endo memory presets that can be individually designed and tailored to fit various endodontic procedures.

Benefits of the NuTorque system include:

• Auto-reverse, auto-reverse forward, and auto-reverse stop
• Torque control ranges from 0.1-3.0 Ncm with capabilities of 384 Ncm
• 27 (+2) possible reduction ratios
• Fully customizable presets
• Flat screen easily wipes clean for better asepsis and a sharp display
• Screen can also be mounted remotely for user convenience

The NuTorque is equipped with a compact (4 inches), lightweight (99 grams) brushless micromotor that enables the operator to maneuver comfortably and effectively throughout the oral region. The NuTorque system delivers consistent speed and powerful torque on both high and low speed settings. The 50 dBa whisper-quiet, vibration-free motor system is also easily adaptable to existing standard delivery units. Moreover, NuTorque’s micromotor is fully autoclavable.

In addition, NuTorque attachments feature lightweight, durable, and corrosion-resistant titanium housings that provide a firm, tactile grip. The light weight imparts exceptional balance and helps reduce hand and wrist fatigue.

Attachment features include:

• Push-button autochuck for easy bur placement/removal
• Quick, simple connections with 360-degree rotation
• A wide speed range of up to 200,000 rpm
• Ergonomic grips relieve user fatigue
• Universal E-type coupling
• All attachments are fully autoclavable

StarDental’s NuTorque system has a three-year warranty on the control box unit, a one-year warranty on the motor, tubing, and attachments, and a one-year warranty on the transformer.

Added 08/21/2008

Exceptionally compact and ergonomic, the SuniCam II offers 105 degrees of viewing access to optimal diagnostics. It incorporates an aspheric lens to eliminate distortion. Its LED illumination enhances image quality. The sleek design provides patient and user comfort.

Added 08/21/2008

Designed to maximize operator comfort, visibility, suction efficiency, the Angle-Ease Adjustable HVE Tip has 12 locking angle adjustment positions, allowing it to meet every treatment and operator requirement:

Superior Ergonomics and Operator Comfort - adjusts from a straight bayonet position to a 90ş angle to easily reach any quadrant. Lowers fatigue and eases strain on the wrist by reducing hose tension and drag.

Improved Visibility - offset approach keeps hands clear of the working field.

Increased Efficiency - allows hose to slope downward from the valve for maximum suction efficiency.

Full Retraction - rigid construction retracts cheeks just like standard tips.

Reversible Design - accommodates either right or left-sided assisting.

Fits all standard HVE valves. Single-use white plastic construction. 50 tips per package. Patent pending.

Added 08/18/2008

An extension of the Instrument Management System (IMS), Signature Series Procedure Tubs serve as portable operatory drawers to organize, store, and transport disposable materials to and from the storage/sterilization area and the operatory. This standardization eliminates time-consuming tray preparation.

Color-coded to match IMS Cassette rail colors, these customizable tubs manage consumable materials by procedure and provide esthetic integration and streamlined instrument management.

Signature Series Tubs contain Microban that inhibits the growth of microorganisms that can cause staining, odors, and product degradation. The tubs also feature locking covers to protect the materials during storage and transportation.

Available as a Complete Tub with one part code (including a tub and all necessary accessories) or can be customized to meet the office’s individual needs with a wide range of accessories. Tubs are available in 8 colors.

Added 08/14/2008

Masel’s Doublegard ready-to-wear mouthguard is designed specifically for active children and adults who wear braces.

The mouthguard's spring-loaded hinge provides maximum protection, keeps the mouthguard in place, and allows natural jaw movement for optimal comfort. This stable fit allows easy breathing and prevents dislodge, even upon impact.

Contoured to follow the natural anatomy of each arch, Doublegard is fabricated from latex-free material that is durable yet flexible and conforms to the NCAA guidelines for colored mouthguards.

Two new color assortments, sunburst and metallic, are now available presenting an even more expansive color selection. Doublegard is available in junior and adult sizes, with and without a strap.

Added 08/14/2008

Developed to improve practice workflow and efficiency, DEXIS Integrator for DENTRIX provides seamless integration between DEXIS Digital X-ray and DENTRIX Practice Management Software.

It features the DEXIS Image Pane allows viewing and accessing of all available images; specific images can be quickly and easily selected for administrative and clinical functions.

DEXIS Integrator for DENTRIX offers immediate one-click access to patient images, to DEXIS imaging software, and to image acquisition--all from within the patient's chart. Additionally, it provides a simple process for attaching images for referrals, lab cases, and e-claims.

Other features include the ability to enlarge an image up to full-screen and apply ClearVu image enhancement and annotations from within the chart; image indicators on the chart that alert the clinician of pre-existing images for each tooth; and full integration with Henry Schein's GURU patient education system.

Added 08/06/2008

An upgraded version of the Delta XL sterilizer, the Delta Q features closed-door drying, which prevents the interruption of the full Sterilization process by allowing instruments to dry completely in an enclosed, clean environment.

Other features include an ergonomic handle, a user- friendly touch pad, a long chamber depth that accommodate up to three large cassettes and three small cassettes per load, and an innovative PC cable that enables sterilization history to be downloaded directly a PC (eliminating the need for a printer).

The Delta Q offers a six months full replacement guarantee and three years parts warranty.

Added 08/04/2008

Grip-Rite anesthesia syringes have silicone-covered handles and wings (available in red, blue, and purple) for an improved grip, optimal control, and user comfort.

The syringe hubs are permanently affixed to the syringe, eliminating the need for removal to sterilize and the need for misplacement.

Standard and petite sizes are offered; the petite size's shortened harpoon rod simplifies aspiration for users with smaller hands.

Added 08/04/2008

ACCUPAL is a cordless, compact, handheld device that effectively pre-conditions the oral tissue to receive virtually pain-free palatal or other intraoral dental injections.

ACCUPAL incorporates four known and proven pain-reducing theories into one economical, user-friendly device:

1. ACCUPAL incorporates the "Pain Gate" theory to energize the dental tissue in and around the site to be punctured by the needle.
2. ACCUPAL's ultrasonic tissue stimulation disrupts the tissue injection site to allow standard topical gel to pre-condition the injection site, thus further reducing the needle’s pain-producing effects.
3. ACCUPAL vibrates the needle at the injection site. The pain-reducing effects of direct needle vibration are well documented as having a positive effect on injection comfort.
4. ACCUPAL ensures that the clinician inserts the needle bevel at its narrowest point, which provides the most minimally invasive path possible and reduced tissue damage to deliver a consistently comfortable palatal injection.

The economical ACCUPAL is available online at www.accupal.com. The complete starter package, which includes the ACCUPAL cordless handpiece, 50 disposable tips, a patient education CD-ROM and a clinician training CD-ROM, is priced at $479.00 plus shipping and handling. Additional handpieces can be purchased at $179.00 + S&H and disposable tips are available for $99.00 + S&H for a package of 50, $189.95 + S&H for 100 and $279.95 + S&H for 150. Additional patient education and clinician training CD-ROMs are also available.

Added 07/25/2008

Designed by a physical therapist and spine specialist, the AnterioRest dental chair support device creates an ergonomic workstation to prevent and treat lower back injury. The concept of Back Support From the Front® applies research findings which suggest that anterior support is far more effective than posterior support in reducing muscle stress in an inclined position.

The AnterioRest attaches to the back of the patient chair and terminates in a small cushion against which the practitioner leans, thus freeing arms and hands for stress free manipulation of instruments. The supporting arms can be moved through a full range of motion, accommodating all treatment positions for right or left handed users. The optional dual mount installation attaches two AnterioRests to the back of the patient chair providing support for both the dentist and assistant during four-handed procedures. The AnterioRest has been instrumental in alleviating back, neck, and extremity pain, helping many users return to comfortable living and productivity.

Specs:

Length: 30” max. (mounting plate to pad)
Width: 7” or 9” (breadth of pad)
Height: 13” (upper arm to top of pad)
Weight: 10 lbs. (4 kg)
Pad: 5” x 7” oval or 3” x 9” rectangle
Materials: Powder Coated Steel and Aircraft Grade Aluminum, Synthetic Leather, Phenolic Polymer
Adjustments: Three pivoting joints allow the upper and lower arms and chest plate to swivel into virtually any confi guration. This enables the operator to place the chest pad into their preferred position. All joints are locked into place by one centrally located knob.
Lower Arm: 13” of horizontal extension
Upper Arm: 10” of vertical extension
Mounting: Secured to back of patient chair via specially designed mounting plate
Cleaning: Standard solution wipedown

Added 07/24/2008

The eView large x-ray viewer is 34-mm thick. It is light and portable enough to be mounted on a wall vertically or horizontally.

A clear and sharp image of any x-ray (single, panoramic or CT) displayed is the result of advance technology of even light that’s distributed throughout the panel as powerful as 6000 candles. If offers a 10,000-hour lamp life, powered by 115V.

Viewer panel size 600mm x 420mm

Viewer full size 700mm X 520mm.

Added 07/14/2008

Weighing just 1 ounce, the BlueStreak and SilverStreak highspeed air turbine handpieces are made of ultra lght weight aluminim, The U.S.-made handpieces operate at speeds up to 450,000 RPM. They are offered in Standard or Push Button versions and in 2 or 4 hole configurations, accept canister turbines, and carry a 6 month warranty on all shells.

Added 07/11/2008

Slim, compact, and available in five colors, the Einstein Stella wireless digital intraoral camera offers instant set up, with no wiring required. It features:

Auto Focus--There is no manual focus required. The camera instantly adjusts focus from a full arch to a single molar.
Brightness Adjustment-- With the touch of one button, the brightness can be easily adjusted depending on the application. The brightest setting is ideal to take the full arch image, and the level of brightness can be adjusted accordingly to the area of interest.
More Intense LED Light-- Einstein Stella is equipped with more intense LED lights than other Einstein series to bring out the clear image with more natural colors.
On-Board Memory-- It holds 15 images on its on board memory for instant review.
Finger-Tip Operation-- High quality images can be instantly captured and stored in the camera by a single click on the freeze button. Slide the button to review with patients.
Battery Level Indicator-- Einstein Stella indicates the remaining of battery level on the screen. You may keep your eyes on the battery level with this indicator knowing when to charge.
Comparison Mode-- Two-image comparison mode achieves more effective presentation on the spot. Displaying before and after images does not require a computer.

Added 07/11/2008

Wingers horizontal bitewing x-ray positioner has been improved. The new longer bitewing tab (+1.5cm) contains a small insertion slot to allow attachment of an integrated (single piece) x-ray, aimer ring and bar.

The new x-ray guide bar easily slides into the tab of the disposable bitewing and can be sterilized for re-use. The longer tab also allows for positive cheek retraction.

Comfortable for the patient, the positioner now allows clinicians to capture excellent images either using the bi-secting angle technique or as an aimed shot.

A Free aimer ring-guide bar will be included in every box of Wingers horizontal bitewings (Lg.) 088-124. The product is also made for the number 1 sensor (088-126). Samples are offered.

Added 07/11/2008

Designed specifically for the restorative general dentist, the Waterlase C100 all-tissue laser delivers Waterlase dentistry clinical procedures including cavity preparation with little or no anesthetic in many cases, early stage periodontal therapy and soft tissue procedures with more patient comfort compared to conventional instrumentation.

Priced to appeal to a broader cross section of dentists, the C100 laser combines industry-leading Waterlase YSGG technology with excellent reliability, clinician control, operating efficiency, and flexibility in tip and accessory selection.

While it offers a narrower scope of applications than Waterlase MD, it provides for an advanced level of clinical results and patient comfort in a wide range of hard and soft tissue procedures.

Added 07/11/2008

Preva Plus combines the features of high frequency dental x-ray with a high resolution digital sensor engineered directly through the x-ray arm. The system improves chair-side imaging workflow with the immediacy and convenience of an at-hand, always-ready digital sensor. Using the latest microprocessor technology and USB 2.0 flexibility, Progeny delivers a practical and user-friendly integration of x-ray and sensor.

Preva Plus eliminates having another cable in the operatory and concerns about possible drop damage or misplacement of sensors. The sensor is stored in a low profile holster directly on the arm for the most convenient possible access. A simple interconnect plug allows the user to switch quickly between sensor sizes or remove the sensor for cleaning.

Progeny’s Vision DX sensor provides immediate, detailed images via high speed USB connectivity to the operatory PC. Its rounded corner profile adds to patient comfort, while its robust construction and strain-relief cord provide durable, everyday diagnostic digital imaging.

Added 07/10/2008

The 3.0mm Zimmer One-Piece Implant, available in straight and angled designs, is suitable for placement in the tight interdental spacing of the maxillary laterals, and mandibular central and lateral incisors. The pre-contoured margins require minimal or no intra-oral preparation – which eliminates heat and vibration, creating a better experience for the patient.

The Zimmer One-Piece Implant combines the design features of the Tapered Screw-Vent® Implant with the prepared margins of the Hex-LockTM Contour Abutment — creating a one-piece solution for immediate restoration. Corresponding caps and copings further simplify the restoration process for the clinician and patient, and add to the system’s flexibility and convenience.

Zimmer One-Piece Implants are part of the Tapered Screw-Vent Implant System – an integrated family of implants, abutments, and copings. They also are offered in 3.7- and 4.7-mm diameters.

Added 07/10/2008

Indicated for a variety of uses, including ridge augmentation, socket and furcation therapy, sinus elevation, GTR / GBR surgeries , and apicoectomies, NovaBone Dental Putty® is a Calcium- Phosphosilicate bone graft material built from a bioactive glass platform with additives to improve handling and efficacy. Its medical grade silicone binder dissolves in 2-3 days, leaving calcium phosphosilicate to actively regenerate bone

The completely synthetic material is easy to handle, completely resorbable, osteoconductive, and osteostimulative.

The putty does not require mixing prior to placement. It is dispensed in a pre-mixed state and can be placed directly into the defect site directly from the package.

It can be mixed with Allograft/Autograft but by using a "sandwich" technique so as not to lose the consistency of the graft material.

Added 07/10/2008

Formulated to protect surgical sites, COE-PAK AUTOMIX NDS is a noneugenol surgical dressing and periodontal pack that has no burning sensation, no unpleasant taste, no disagreeable odor. It promotes cleanliness and healing. Plastic and cohesive; ropes of any length or thickness can be formed. Smooth texture allows COE-PAK to adapt closely to teeth and tissue to protect the wound. Sets with resilient, non-brittle hardness.

The NDS version (New Delivery System) eliminates manual mixing and provides a consistent mix for immediate placement.

Added 07/08/2008

The transmucous Aesthetica implant is engineered to create a very strong anchorage at the highest level in cortical bone and to provide exceptional primary stability of the implant.

The implant's sanded and etched surface treatment allows immediate or early loading when the required conditions for such technique are fulfiled.

Aesthetica has a double self-tapping thread and an exclusive microthread Euroteknika. It better manages the soft tissues and maintains better control of the prosthetic connection.

It is available in 3 platforms, NP 4.2, RP 4.5, and WP 6.5.

Added 06/30/2008

With a diameter of 2.7 mm, the Obi narrow-diameter implant is used for overdenture stabilization, for implant supported fixed prostheses on incisors and/or where there are short mesio-distal spaces or thin crests. It can also be used as a temporary implant between permanent implants.

Obi is made of titanium grade V whose mechanical characteristics (resistance) are adaptable to the implant diameter. Its asymmetrical threading ensures primary stability. Obi has atraumatic progression thanks to it’s rounded off extremity.

It comes in lengths of 9, 11, 13, and 15 mm.

Added 06/30/2008

Statis Air-Driven High Speed Handpieces are engineered to provide optimal handling, an extremely quiet turbine, 20 watts of power with increased lateral cutting torque, a low friction co-efficient, 25,000 LUX shadow-free illumination, and an exceptionally small head size.

A pushbutton chuck provides higher precision and improved centric running, reducing operating noise and extending the life of the instrument.

The turbine bearing incorporates a new cage material with improved lubrication and oil absorption characteristics. The improved coeffi cients of friction provide you with benefi ts of lower failure rates, and thus lower repair costs.

The spray system is also innovative: In the STATIS ML four jets ensure optimum cooling of the tooth. The STATIS SL comes with a slotted nozzle. As a result, the entire treatment region is ideally cooled by a fan-shaped spray.

A universal coupler is compatible with Connex L quick connect system – the SciCan alternative to all MULTIfl ex® couplers*, fi tting most modern treatment units.

Sterilizable to 135 °C.

Added 06/27/2008

The Technology and Lighting Center (TLC) is the only overhead multimedia display that allows patients to comfortably watch TV, intraoral camera or computer images, videos, or movies. Plus the integrated fiber optic dental light shines in the patient's mouth - not in the eyes, providing an unobstructed, glare-free, heat-free experience. It comprises:

A high-intensity dual-beam fiberoptic operating light that generates no heat and illuminates only the oral cavity
Ceiling track with LCD monitor bracket
Multimedia control center with built-in TV tuner and infrared remote control
Flat-panel high-resolution display with built-in speakers

The TLC System is designed to unclutter the operatory, and allows patients to relax and focus on the digital monitor, so that they rarely move their heads during treatment

Added 06/27/2008

Designed to control and manage orthodontic anchorage based on directional force mechanics, Abso Anchor Micro Implants are suitable for pre-surgical and pre-restorative tooth movement and may provide an alternative to surgery. Requiring no osseointegration, the micro implants have broad clinical application including:

• retraction of teeth
• molar uprighting
• molar distalizing
• midline correction
• protraction of the posterior teeth
• intrusion of anterior and posterior teeth
• correction of occlusal canting

With a small diameter of 1.2mm to 2.0mm, the micro implants are easily inserted into many previously unattainable areas of the maxilla and mandible. Ideal for both self-tapping and self-drilling driving methods, they are made from high quality titanium alloy, feature a variety of head types, and are compatible with all orthodontic systems including wire, ligatures, elastomers, and springs

Added 06/27/2008

CamSight’s Opti Intraoral Camera incorporates CCD technology and bright LED light to provide crisp, clean images. The Opti’s sleek design makes it highly maneuverable while its user-friendly approach and large depth of field make it practical and easy-to-use.

It has a USB interface, so dentists can easily plug the camera directly into any USB port on a computer or laptop. The Opti has a capture button right on the handpiece to conveniently capture images.

The Opti is capable of supporting the needs of any size dental practice and is available in different system packages. The Opti Intraoral Camera can be used with dentists’ existing software or can be purchased as a kit with CamSight's CDMi Intraoral Imaging Software.

Added 06/26/2008

The OptraGate lip and cheek retractor has been replaced by OptraGate "ExtraSoft" for added patient comfort and a gentle fit that minimizes pressure.

In addition to the optimization of the material quality, recesses to accommodate the upper and lower lip frenulum have been added to the inner ring. These modifications make OptraGate "ExtraSoft" even more comfortable to wear for patients over longer periods of time.

OptraGate "ExtraSoft" provides perioral retraction of the lips and cheeks and thus considerably enlarges the operating field. As a result, visibility and accessibility are significantly increased. In contrast to conventional, rigid lip and cheek retractors, the OptraGate "ExtraSoft" adapts to the individual oral situation because of its three-dimensional flexibility.

Added 06/24/2008

The Explorer magnifying video scope allows dentists to work in ergonomic comfort while looking at the monitor so they no longer have to perform procedures in a constant head down or bent over position. The Explorer replaces the need for loupes and reduces eye strain as well as neck and back pain.

The Explorer's built-in motorized lens system offers hands-free operation with simple control features such as a foot pedal. During a procedure, simply tap the foot pedal to zoom, focus, adjust brightness and capture still images.

Dentists can capture still images with just a click of the foot pedal, making visual documentation easily accessible to view with patients during case presentations for better communication. CDMe software features include Reverse Image, which flips mirror images to view as direct images; Still Digital Image Capture, Case Presentation and much more. The Explorer’s software can also be fully integrated with CamSight’s Digital X-Ray Imaging Software to view microscopic images and x-ray images on the same screen.

The Explorer™ has a bright LED light that can replace a conventional operatory light. It available in different configurations including floorstand (mobile), floor mount, track mount and ceiling mount.

The Explorer can be seamlessly integrated into any imaging software or computer system.

Added 06/24/2008

The Ana-Bel extraoral X-ray system utilizes the advanced features of a high frequency generator and fast scan times to reduce patient radiation exposure and produce superb digital Panoramic, TMJ and Maxillary Sinus images.

Standard Features:

• Panoramic (child, adult, orthoradial), 4 view lateral and 2 view frontal TMJ and maxillary sinus imaging
  
• Advanced system design enables ANA-BEL to produce radiographs with minimal interproximal overlap, for easier detection of carious lesions
  
• Sharp images can be obtained, even with mild patient positioning errors
  
• Simplified controls permit operator to select kV, mode, mA and exposure time
  
• Pushbutton controlled three-laser beam alignment system for correctly positioning patient mid-sagittal, frankfort and focal-trough planes
  Pushbutton controlled X-ray head height adjustment accommodates adults or children, both seated and standing 60-90kV, 2-12mA 0.5mm x 0.5mm focal spot
  
• Fast 7 second scan or 12 second scan time
  
• Rotational speed adjusts to reduce shadow effect on the image of the cervical vertebrae
• UL listed

Added 06/18/2008

Satelec® SP Newtron® LED, an innov utrasonic scaler from The Acteon® Group now is available as an integrated option for A-dec delivery systems. The non-lighted SP Newtron ultrasonic will continue to be available.

With fully-autoclavable integrated LED lighting to improve visual access in the oral cavity, the SP Newtron ultrasonic scaler can perform a variety of tasks throughout applications such as perio, root planing, endo, retreatment, surgery, plus more.

The powerful, yet gentle SP Newtron uses an intelligent power control system that adjusts instantaneously to resistance encountered at the tip, resulting in more consistent and precise tip vibration. A wider frequency range continuously adapts the vibration of the tip, optimizing performance and reducing tip wear. Amplitude control provides smooth vibration throughout the procedure.

Both models fully integrate with A-dec delivery systems, which means less reaching, increased productivity, and more time in the day.

Added 06/18/2008

CliniView XV is an easy-to-use software with powerful functions for digital image capturing, viewing, printing and storage. Included are a wide range of dental specific image enhancement tools. CliniView XV software supports image capture from Instrumentarium Dental’s Orthopantomograph® panoramic and Orthoceph® cephalometric units and SIGMA™ intraoral sensors. In addition, images can be imported or scanned from a wide range of other digital sources.

CliniView XV software’s advanced pre-processing algorithms optimize grayscale automatically and ensure excellent image quality without additional adjustments. The pre-processing algorithms can also be individually selected. Once acquired, the images can be transmitted to another workstation, an image archive, or sent by e-mail.

The system can also be integrated into other software applications, such as practice management or cephalometric analysis software. Twain integration and DICOM compatible software is also available.

A wide range of dental specific imaging enhancement tools such as: brightness, contrast, magnification, edge enhancement, noise reduction, sharpening, grayscale inversion, length and angle measurement and spot contrast enhancement.

Capturing an intraoral image series easy and fast with ready made or user defined templates

Added 06/17/2008

The Orthopantomograph® OP200 D Panoramic Dental X-Ray Machine digital unit includes a built-in reliable computer directly integrated into the system. No additional computer is required.

Features include:

• Animated patient positioning guide--
  The user can select patient positioning animations specific to each imaging program to ensure proper patient position.
  
• New smart compact handcontrol unit--
  The OP200 can be configured for the unit to be alternatively operated from a handcontrol instead of the SmartPad™.
  
• SmartNav™ Intelligent interactive navigator--
  The SmartNav™ software’s navigation program provides easy selection of imaging programs, arch sections, lateral scanning start position, and more. The user can easily set the desired OP200 user parameters in SmartNav™. All information is displayed and described in an understandable way.
  
• SmartPad™ full color high resolution touch screen--
  The SmartPad™ produces an easy to read and follow menu with simple and intuitive navigation through the operations.
  
• Instant dynamic help--
  This feature provides quick and convenient information related to the imaging programs, such as the purpose of the program selected. Complete user manuals are also included in SmartNav™.
• Advanced high frequency generator technology
• Small focal spot
  
• Clinically correct imaging geometry
  
• V-shaped X-ray beam
  
• Latest CCD technology
  
• Dose controlled Automatic Exposure Control (AEC)
  
• Automatic Spine Compensation (ASC)
  
• Accurate and stable 5 point patient positioning
• Open view of the patient
  
• Side positioning
  
• Three clear laser positioning lights
  
• Professional software tools
  
  

The Ortho Zone program provides special geometry to solve two common imaging problems: metal artefacts in the molar region of the condyle, and the need for an exceptionally wide anterior layer for patients with malocclusion.

Added 06/17/2008

Endobon Xenograft Granules are hydroxyapatite ceramic derived from cancellous bovine bone and are fully deproteinated by a two-step high temperature manufacturing process for safety from bacteria, viruses and prions. The osseoconductive properties enable bone to grow directly on its ceramic surface and through the entire graft. Endobon Xenograft Granules have:

Excellent Handling Characteristics For Easy Transfer To The Defect Site
Interconnecting Micro And Macro Pores For Bony Integration, Which Leads To Graft Stability And Vascular Ingrowth.

Endobon Xenograft Granules are indicated for dental and/or oral surgical procedures such as:

• Aesthetic Contouring Defects
  
• Periimplant Defects
  
• Ridge Augmentation
  
• Any Procedure Where The Granules Are Used As A Graft Extender
  
  

Added 06/13/2008

The PerFect TCS II is a high frequency electrosurgery system designed to help manage soft tissue with efficiently, precisely and lwith less bleeding than the common dental scalpel.

PerFect TCS II

• Removes unwanted tissue with ease
• Reduces chair time by simplifying operative procedures and maintaing hemostasis
• Provides unequalled cutting precision for superior clinical and aesthetic results
• Allows problem-free healing
• Two applications: cutting and coagulation
• Autoclavable electrode sheaths

Clinical applications include:

• Widening gingival sulcus
• Crown lengthening
• Exposing impacted teeth
• Removing hyperplastic gingiva
• Frenectomy

Added 06/12/2008

Featuring a lightweight, ergonomic design that fits all hand sizes comfortably, the Vivid intraoral video camera features:

• Color-balanced, high-intensity 8-LED light for bright, true-color images
• Optimized depth of field for capturing close-ups and full-arch views without the need to manually change focus
• Comfort curve tip for easy full mouth surveys and optimal access to third molars
• USB 2.0 plug-and-play connection
• Spotlight tool for magnifying areas of interest
• A raised control button for instant feedback
• Capture button functions on release for stability
• 6.5-foot cable for extended reach (10- and 30-foot cables offered optionally)

Added 06/12/2008

From impression materials and composite accessories to x-ray film and exam gloves, a comprehensive selection of consumables and disposables are available directly from the supplier, iSmile Dental Products.

The direct selling model allows the company to offer economical prices on the entire line.

Among the items available are:

• Topical anesthetic gel
• Dispensing syringes
• Composite mixing wells, brushes
• Cotton rolls
• Barrier protection
• Saliva ejectors, tips, and traps
• Latex, nitrile, and vinyl gloves
• Impression materials, trays, and mixing bowls
• Ultrasonic cleaning units and infection control accessories
• Hand instruments
• Prophy paste and angles
• Fluoride and trays
• Bitewing tabs

iSmile products offer dental professionals an average savings of 15-20% compared to products sold by the large, national dental distributors.

Added 06/10/2008

The new 3D Accuitomo 80 offers a minute voxel size of 80 µ (micrometer). This super-fine voxel combined with the unit's 13 bit grayscale capability produces exceptional clarity with a very low effective dose.

It offers an expanded field of view, up to 80 x 80 mm.

The newly developed Zoom Reconstruction feature generates a high resolution image from the original scan without retaking the image. Morita's proprietary One Data Viewer program allows viewing of 3D images on any computer without special software.

FOV: 40 X H 40 mm, 60 X H 60 mm, 80 X H 80 mm.

Added 05/29/2008

The new Veraviewepocs 2D/3D offers digital 3D, panoramic, and cephalometric imaging options. Designed for versatility, the 2D model can be upgraded to 3D at a later date.

Easy to operate, the Multifunction Cassette enables both panoramic and 3D images to be taken without changing the cassette. For 3D positioning, simply click the region of interest on the panoramic view and the machine automatically re-adjusts. With exceptional clarity and low effective dose, plus super high resolution 3D images - 125 µ (micrometer) voxel - the Veraviewepocs 2D/3D delivers both clinician and patient benefits.
FOV: 40 x H 40 mm, 40 x H 80 mm, 80 x H 80 mm.

Added 05/29/2008

Hemostasyl hemostatic gel is formulated to provide quick, safe, pain-free, lasting hemostasis in the oral cavity within two minutes by way of an additional mechanical mode of action. In most cases, bleeding is even stopped within a few seconds by the hemostatic dressing – leaving a clean and dry working area to ease tartar removal and scaling.

The astringent and hemostatic effect of Hemostasyl arises from its combination of aluminium chloride and kaolin. Hemostasis is further enhanced mechanically by the thixotropic properties of the material. It takes only a few seconds to apply the turquoise-colored gel. The curved applicators simplify precise placement while preventing the risk of cross-contamination. The qualities of the gel adhere it to the mucous membrane even when there is moderate bleeding – without applying excessive pressure to the gums. After a maximum exposure of two minutes, the product can be removed with a gentle air/water spray accompanied by suction.

Hemostasyl is available in a starter kit containing two syringes (2g each) and 40 disposable curved applicators. Refill packs are also available.

Added 05/23/2008

The OrBo system is tiny, yet powerful light source for illuminating the oral cavity during treatment.

It is a mini U-shaped clip equipped with two high-brightness LEDs. The autoclavable clip comes in two sizes: one for suction tube and one for the saliva ejector.

The long tiny power cord is the “Brain” behind the light; the cord consists of a unique electronic design that stabilizes light output. The cord easily attaches to ejector hosing with the provided Velcro strips thus not interfering with work.

The OrBo is a hands free powerful light source, easy to operate that will ease eye stress.

Added 05/23/2008

The Midwest® Stylus™ ATC air-powered adaptive control handpiece combines air and electric handpieces a single handpiece system. Stylus ATC delivers the power and efficiency of electric handpieces without sacrificing the superior access, light weight and familiar comfort of conventional highspeeds.

The patented Adaptive Torque Control (ATC) technology actively senses the need for torque, and automatically adjusts performance while you are cutting to complement your cutting technique. Stylus ATC is equipped with a robust air turbine to avoid overheating common with electrics and operates at a low pitch for a more relaxed working environment.

With activation of the rheostat, the Stylus ATC system:
Accelerates to an optimal cutting speed.
Continually monitors bur load.
Senses the amount of torque delivered.
Automatically adjusts torque to maintain peak power.
Limits speed when the bur is not under load to minimize wear on handpiece bearings.

Stylus ATC provides high power on immediate contact with the tooth and maintains that power level at a constant speed throughout the procedure.

Added 05/23/2008

Featuring a curved design, the SOPRO 617 intra oral video camera provides a 105° angle of vision allowing a better exploration of the distal areas.

Features include:
The rounded shape and extremely reduced dimensions of the camera head improve patient comfort while preventing any trauma to the mouth.

The optical system is equipped with an aspheric lens that eliminates distortion and provides a more uniform quality image. Its optimized angle of view enables perfect visibility even into the hard-to-reach rear areas of the mouth.

The lighting system is composed of the latest generation LEDs that utilize condensers to focus the light and produce a very powerful beam:

• the image is luminous in any circumstance
• the emitted heat is reduced
• the entire image is uniformly illuminated (minimal shading).

One or four images can be frozen on the screen with a simple glide over the Sopro Touch. The sensitivity of this touch prevents blurry images .

Quick and safe connection through a strengthened “push-pull” socket which rotates to preserve product integrity and prevent any incorrect manipulations. It is offered as a stand-alone tabletop or wall-mounted unit or for integration into existing delivery units.

Added 05/23/2008

The SurgiCam Digital Video Camera can capture DVD-quality video directly via USB for digital recording on a desktop or laptop computer. This patented technology offers a unique way to visually document clinical procedures in digital format, thus eliminating the need for additional specialized control units. The small lightweight unit can be use with or without loupes.

Advanced Miniaturization
The SurgiCam Digital Camera System features advanced miniaturization and a combination of high-precision optical lenses with an integrated sensor technology that provides outstanding image quality and overall ease of use.

USB Plug & Play Technology

USB provides easy set-up and on-the-fly activation, as well as effective access to digital video and images with no data conversion, no delay, and no complex video equipment.

Added 05/23/2008

A-dec announces the release of a new combination in quality treatment room equipment: the Decade Plus chair with Radius delivery system. The combination offers a patient chair, two styles of Radius delivery systems, plus a long list of convenient options.

Decade Plus chair features include a thin 1-1/2" (38 mm) backrest that provides an excellent blend of access and comfort. With patients comfortably inclined, operators now have more room under the chair to move closer and work in a more ergonomic position. Decade Plus upholstery is available in sewn or seamless, with a selection of 40 colors. Other standard features include a double-articulating headrest, 60° swivel, and quick-release armrests.

In either Traditional or Continental® styles, the Radius delivery system rotates around the front of the chair for ease of positioning and left/right compatibility. Support options include cuspidor, assistant’s instrumentation, monitor mount, and dental light—which are also delivered from a rotating arm system for optimum positioning. All systems come pre-wired to support the integration of ancillary devices such as a curing light, intraoral camera, electric motor, and ultrasonic scaler.

Added 05/23/2008

With proprietary staggered toothing and blade geometry, KOMET USA’s tungsten carbide bone cutter H254E allows for oral surgery to be carried out gently.

The H254E is recommended for the minimally invasive preparation of bone tissue and hard tooth substance. The instruments prepare bone and hard tooth substance in a tissue-friendly manner (i.e. in case of an apical ectomy). The H254E is also used to separate the mechanical attachment of a tooth, which is planned to be extracted, in the alveolus or to split the bone in conjunction with the removal of an impacted tooth. The bone cutter is also available in the 5 mm longer version H254LE with a total length of 31 mm for preparing molars.

The H254E is also capable of cutting hard tooth substance, in particular tooth roots. It is designed for use in the micromotor only (red contra-angle) and not in the turbine.

Added 05/20/2008

The new KODAK 9000C 3D Extraoral Imaging System enables orthodontic professionals to obtain low-dose, high-resolution, three-dimensional (3D) images, as well as panoramic and cephalometric images, at an affordable price. Featuring an attractive, user-friendly space-saving design and a full cranial lateral format, the system provides a broad range of image formats.

Features include:

• “One-shot” cephalometric technology maximizes productivity and image quality with image acquisition taking less than one second
• Panoramic image quality is optimized for the jaw morphology of the patient with the new variable focal trough feature
• Can capture a localized field of view 3D image, which can be limited to an impacted cuspid area, the roots of upper centrals or a temporomandibular joint (TMJ) area. The result...less radiation, high image quality and elimination of the need to capture and interpret unnecessary information
• Indicated for a wide range of cases such as micro-implants, wisdom teeth or impacted canines, and identification of mesiodens, and more
• Requires 20% less space than its predecessor, due to a 16-inch reduction in the length of the cephalometric module, reducing the need for room modifications
• Its motorized collimator delivers a broad range of cephalometric formats. It suits any orthodontic tracing need, from the full skull (12”x12”), to standard (8”x10”) and small field for lower dose exposures
• Generates lateral, frontal and submento-vertex images with constant reproducibility.
• To switch between panoramic, cephalometric and 3D modes, users simply select the program and the unit automatically switches between 3D and panoramic modes—without any manual interaction with the sensor. This eliminates the risk of sensor dropping

The KODAK 9000C 3D System will have limited availability during the summer of this year.

Added 05/15/2008

The 1.9-ounce Styla MicroLaser™ for soft-tissue applications combines innovative design and diode laser technology in a self-contained unit measuring only 6.9 inches long. The handheld Styla has no wires or cables, allowing dental professionals to move freely throughout treatment areas. In addition to 2.0 watts of power, eight pre-set procedures and continuous and pulsed modes, Styla’s features include:

• Lightweight Aluminum Body: Styla’s sturdy aluminum body is durable, yet lightweight and ergonomically balanced, so it remains comfortable even after extended periods of use.
• Pre-threaded Disposable Tips: Styla’s pre-threaded disposable tips save time by eliminating the need for scoring and stripping, and are ready to use straight from the box. Precisely placed magnets accurately align and secure the tip for an exact fiber connection every time.
• Intelligent Gravity Sensor: Styla’s built-in gravity sensor automatically detects the microlaser’s orientation and adjusts the high-contrast display to be read whether operated by a left- or right-handed practitioner.
• Compact Charger Base: Styla’s compact charger base serves as both Styla’s resting place between procedures and a battery charger capable of simultaneously charging three batteries in less than one hour.
• Rechargeable Lithium Ion Batteries: Styla comes with two rechargeable lithium ion batteries. A single Styla battery can run for more than 20 minutes without interruption—enough power for over 15 procedures. Fully charged, battery stand-by time is more than eight hours.
• Wireless Foot Pedal: Styla’s wireless foot pedal uses 2.4 GHz wireless technology to securely communicate with Styla’s main body.

Added 05/15/2008

The Dental SideKick Chairside Interactive Patient Education System is a responsive, bilingual user-friendly system featuring a wide range of topics (more than 150 clinical topics and 25 movies) in 10 major categories. It was developed to help the practitioner provide a quick, concise, accurate visual explanation of procedures and procedure alternatives. Compatible with existing PC networks and stand-alone computers, it is supplied on two easy-loading disks. A tutorial is included explaining program features and usage instructions.

Benefits

• Easy to navigate
• Any program can be printed and/or emailed
• Take-home CDs can be created
• Informed consent included
• Customizable with practice information, actual cases
• Material can be linked to any Web page

Added 05/13/2008

Suitable for bitewing, periapical, and endodontic image taking, the 1shot holder acccommodates digital sensors and phosphor plates as well as film.

Featuring robust 1-piece construction, the autoclavable, reusable device provides accurate and confident placement; the film/sensor/plate position and the tube can be aligned in 3 planes. It is easy to place in the mouth and eliminates guesswork alignment of X-ray tube to the film/sensor.

Several styles are available to accommodate film and all major brands of digital intraoral systems. Available through Patterson Dental SUpply and Sullivan-Schein.

Added 05/13/2008

Designed to reduce muscular tension and fatigue, the Posiflex 6 Free Motion Dual Elbow Support System features free moving, height-adjustable elbow supports that follow your every move without restriction, yet provide total support and stability for your arms and shoulders. Compatible with any dental stool, the supports allowcomplete freedom of motion but without exertion in the neck, back and shoulder muscles. They are designed to cradle every user’s elbows with optimal firmness and comfort while allowing for complete mobility.

Features include:

• High-strength design with solid steel components.
• Clamps onto the riser of any dental stool in minutes with wrench provided.
• Heavy-duty ball joints with tension adjustment knobs allow elbow rests to swing horizontally with resistance adjustable from zero to fully fixed.
• Telescoping elbow height adjustment locks in place quickly and securely with simple thumb lever.
• Urethane gel pad construction features a non-slip texture that is easy to disinfect and fluid-proof.
• The supports are supplied with instructions and user’s guide and carry a 2-year manufacturer’s warranty.

Added 05/12/2008

Providing protection for up to 6 months, Calm-it™ is glutaraldehyde-based desensitizer that functions by reacting/cross-linking with plasma proteins in dentinal fluid.

This simple, effective technique reduces hypersensitivity & eliminates discomfort from cervical erosion.

Benefits

• Fast pain control… Tubule penetration in seconds
• Compatibility with adhesives, cements, restoratives, amalgams, core build-up & temporary materials
• Low film thickness

Added 05/12/2008

Aseptico's newest electric implantology/oral surgery system delivers state-of-the-art functionality at a great price!

• Powerful brushless 40,000 rpm autoclavable micromotor
• Variable handpiece ratio selection for 1:5 and 1:2 increases, 1:1, and 20:1 reduction E-type handpieces
• Adjustable torque up to 60 Ncm enables a single, high-efficiency 20:1 reduction handpiece (AHP-85MB OR AHP-85MB-C) to be used for the complete implant procedure
• Advanced dynamometer calibration system accurately measures the properties of the motor and handpiece prior to use
• Selectable auto-stop function when desired torque setting is reached
• Contemporary design with easily cleaned surfaces
• Fully integrated, easy-load irrigation pump
• Large, bright, easy-to-read display
• Intuitive user interface that features adjustable handpiece ratio, speed, torque, and irrigation flow settings
• Six programmable preset buttons for storing and labeling custom settings in memory. Presets may be labeled according to technique-specific preferences
• Autoclavable motor holder may be free-standing or mounted to either side of the console
• Upgradeable software for a longer return on investment
• Includes AE-70V variable speed/multi-function foot control
• Autoclavable tubing set for standard irrigation bags
• Optional tubing set accommodates rigid irrigation bottles
• Auto-sensing global voltage compatibility
• FDA, UL, and CE compliant
• Manufactured in the USA

Added 04/28/2008

The next generation of its patient communication system, Demandforce D3 includes two-way appointment confirmations via text messaging. It provides break-through functionality which allows dental practices to more effectively attract new patients, retain existing patients, reduce no shows and measure patient satisfaction. D3 highlighted features include:

• Two-way Text Message Capabilities: Patients can choose to receive a text message to remind them of their upcoming appointment. Patients can reply with a “C” to automatically confirm their appointment in the Demandforce system.
• Intelligent Newsletters: Practices can now segment their patient base to send the right content, to the right patient at the right time thereby increasing per visit patient production.
• Digital Consultant: Demandforce D3 automatically displays critical practice health metrics against aggregate data across the Demandforce network to highlight areas for potential improvement.

Added 04/25/2008

DentiMax ’08 practice management software combines easy-to-use screens with a complete feature set and economical pricing. From the charting screen, you can post procedures directly to the ledger and are one click away from digital x-rays, clinical notes, treatment planning and medical alerts. The software also provides advanced scheduling and front office capabilities.

DentiMax also offers a complete, integrated sensor and imaging solution.

The single user program is priced at $499, the network program sales for $2,499 and the complete digital sensor practice management bundle is offered at $13,999.

Contacts:
(800) 704-8494
sales@dentimax.com
www.dentimax.com

Added 04/16/2008

Specifically developed for soft-tissue management procedures, the Curative 980 diode laser provides precision instrumentation and non-invasive, non-traumatic treatment. Features include:
Detachable fiber spool
Autoclavable fiber for quick patient turnaround
Touchscreen control of preprogrammed procedure settings
Wavelength of 980 +/- 10 nm
Operates in pulse and continuous modes
Lightweight (3 pounds) and compact (5.8 by 7.8 by 9.25 inches)
Footswitch operation
Introductory and standard proficiency laser training courses are offered.

Added 04/14/2008

Specifically for use with the Waterlase MD hard- and soft-tissue laser, the MD Gold™ Handpiece and ZipTips disposable tips are optimized for use together.

The handpiece ooffers:

• 50% faster cutting efficiency for reduced chair time per patient
• Increased cutting precision for conservative, minimally-invasive techniques
• Enhanced “sweet spot” for ease of use and efficiency

Added 04/11/2008

Delivering a quality experience at an entry level price point, the economical NuStar dental chair combines innovative technology with quality components resulting in an easy to use, durable dental chair.
Standard features
Embossed membrane touchpads for the doctor and assistant
Double-articulating headrest
Swing away armrests
Standard 3 year warranty
Durable steel mounting plate
Automatic shut-off safety plate
Single position foot control.
The NuStar dental chairs are available in22 standard upholstery color choices and are manufactured to fulfill industry leading lead times locally in Newberg, OR per the specific configuration of each individual order.
For more information on the Marus NuStar dental chair, please contact Marus at 800-304-5332, or visit www.marus.com.

Added 04/10/2008

Pelton & Crane introduces six new Flexible Monitor Mounts.

Available in six mounting variations: Track, Ceiling, Cabinet, Wall, Post and Ellipse Mounted, the mounts provide advanced positioning capabilities for optimal patient, doctor and staff viewing of the patient monitor within the dental operatory.

Features

• Smooth, seamless handles for easy asepsis
• A handle assist allowing 0° to 90° of monitor movement with less than 4 lbs. of force
• CompressFLEX™ technology which allows the system to travel 40° above and below the horizontal plane, equating to 27” of linear movement..
• Rotates horizontally 350° at two pivot locations.

Accommodates up to a 19” flat screen medical-grade monitor

Added 04/10/2008

Weighing 4 grams (0.13 ounces), the Ultralight Optic is the lightest and smallest LED dental loupe light on the market. Among its features:

BRIGHT, TRUE-COLOR ILLUMINATION--Its 3 watt LED produces up to 39,000 lux (3,600 foot candles), 6000K true white light
LONGEVITY-- LED lasts up to 50,000 hours, virtually eliminates bulb replacement.
RECHARGEABLE--Lithium ion battery pack gives you 8 hours of consistent brightness from a single 3-hour charge. Fully adjustable intensity lets you decide how bright you want it. Ultra thin Li-ion battery pack increases comfort and wearability.
VERSATILE--Fits Designs for Vision, Orascoptic, Surgitel, Sheer Vision, OptiVision Industries, Q-Optics, Carl Zeiss dental loupes DURABILITY AND STABILITY--Aircraft grade aluminum construction

SPECS
Diameter: 0.65"
Length of Module: 0.76"
Weight: 4g or 0.13oz (approx. the same weight as a nickel)
Focuses a 2.5” spotlight @12”
Fully adjustable brightness
Custom Module Colors: Black or Silver
For more details, visit http://www.ultralightoptics.com/Index.html or call (323) 316-4514.

Added 04/10/2008

With 1- and 2-piece implants, the Tapered Screw-Vent® Implant System satisfies a wide range of clinical needs, providing versatility and reliability.

1-piece
The Zimmer® One-Piece offers 3.0mm, 3.7mm, and 4.7mm diameter solutions. The 3.0mm Zimmer One-Piece Implant, available in straight and angled designs, is the solution for implant placement in tight spaces. Its pre-contoured margins require minimal or no intra-oral preparation. Corresponding caps and copings are available.

2-piece
For clinicians in need of a two-piece solution, the Tapered Screw-Vent Implant incorporates the features and benefits of Zimmer Dental’s Tapered Screw-Vent Implant System: friction-fit internal hex connection, triple-lead threads, both MTX™ micro-textured and MP-1® HA surfaces, and a tapered implant body. The Tapered Screw-Vent Implant is available in 3.7mm, 4.1mm, 4.7mm, and 6.0mm sizes.

Stability
The system's friction-fit internal hex platform and lead-in bevel reduce stress on crestal bone and resist abutment screw loosening. Designed for initial implant stability, the system also enables immediate restorations and immediate loading where clinically appropriate.

Contact your Zimmer Dental Sales Consultant or Customer Service at (800) 854-7019, for outside the U.S., (760) 929-4300, or visit www.zimmerdental.com for more information.

Added 04/03/2008

Designed specifically for radiology imaging centers and large practices, Picasso Master is equipped with an advanced flat panel X-ray sensor to capture a 20 cm x 19 cm field of view, which provides three dimensional images of the entire oral maxillofacial anatomy--including temporomandibular joint, sinus and airways-- from a single 360-degree scan.

Its high image quality mode compensates the image-scattering effect of metal artifacts such as crowns and oral implants.

FEATURES
Easy-to-use LCD controller and voice guided instruction to position patient along with midsagittal, vertical, and horizontal laser beam allow an efficient user interface of the most sophisticated cone beam X-ray machine to capture and process the most reliable 3D X-ray images for more accurate analysis of bone structure and tooth orientation.

EzImplant, the pre-installed computed tomography 3D viewing program not only processes a complete diagnostic view of all facial structures but also provides an effective patient information management tool with networking capability to group of oral surgeons, orthodontists and dental support staff. It allows easy image conversions through various rendering methods such as:

• various MPR functions
• cross-sectional view
• two-dimensional analysis
• and three-dimensional animating work

Added 04/01/2008

The Fox diode laser offers precision pulse control from 1 millisecond to continuous. Control with simple, one-touch presets, or set your own preferences:

• Aiming beam intensity
• Pulse aiming beam at the rate you prefer, for enhanced visibility and increased contrast to target tissue
• Audible laser fire tone choice and volume control button programmability
• Screen brightness, contrast and more
• Low Cost Fiber - Lower Cost per Patient
FOX’s fiber can cost as low as less than $1 per patient.
• More Applications and Accessories
• Snap in and out delivery system
• Precise auto calibration
• SHA laser aperture, super tough high tech precision ceramic laser aperture with safety window and dust protection
• You are in control: Watts, joules, accumulated joules, pulse counter, plus precision settings for pulse durations and intervals - from 1 millisecond to continuous.
• As small as small gets, and still solid on the counter
• BMW-style controller, one knob does it all

Added 03/31/2008

ImplantPro™ solid (not coated) titanium implant scalers have solid titanium tips won’t gouge titanium abutments.

• Available in popular Langer and Universal styles.
• Replacement tips available to extend instrument working life.
• Lightweight, ergonomic handle.

Sleekly designed with the peri-implant crevice in mind, these instruments can be used exactly as you would use your standard Langer or Universal curettes. Featuring natural Langer and Universal curette contours, these solid titanium instruments provide ease of instrumentation, safely preserving the integrity of the implant abutment.

Added 03/31/2008

The Belmax CM digital panoramic/ cephalometric X-ray system is simple to use, produces sharp diagnostic quality images and includes built in tomography software. Standard Features:

• Radiographs have minimal interproximal overlap for easier detection of carious lesions
• Sharp images can be obtained, even with mild patient positioning errors
• High frequency X-ray generator minimizes patient exposure to radiation
• Specify right or left cephalometric arm
• Single CCD sensor can be moved between panoramic and cephalometric docking ports
• Pushbutton controlled three-laser beam alignment system for correctly positioning patient mid-sagittal, frankfort and focal-trough planes
• Pushbutton controlled X-ray head height adjustment accommodates adults or children, both seated and standing
• Exposure parameters are easily selected on an outboard computer with a few mouse clicks (computer & mouse not included) 60-100kV; 2-12mA
• 0.5mm x 0.5mm focal spot
• Fast 7 second scan or 12 second scan time
• Rotational speed adjusts to reduce shadow effect on the film of the cervical vertebrae
• Reliable CCD sensor technology for crisp 12 bit images
• Digital sensor module replaces film cassette
• TWAIN driver to interface with most practice management systems

Added 03/26/2008

Based on a 3D visualization of the patient´s anatomy, Facilitate computer-guided implant treatment software helps you to measure and locate vital structures, such as the mandibular nerve, sinus cavities and nasal floor.

The software program contains 3D images of implants, abutments and teeth for efficient, accurate and reliable planning of implant positions, sizes and number of implants, and abutments to be used. When the case is planned, a surgical guide is ordered to make sure that the planning result will be replicated in the real surgical situation.

• A complete planning system
• Plan the whole treatment, including choice of abutments
• Developed for Astra Tech implant system
• Pre-operative planning and less chairtime
• Simplified and more predictable surgery
• Comprehensive information about the patient's anatomy
• Guidance for each individual implant regarding position and size
• The surgical guide helps to replicate the virtual planning at surgery
• Outstanding communication tool
• All members of the implant team base their decisions on the same information
• Makes it easy to explain the treatment to the patient
• Facilitate™ is based on the successful SimPlant™ software from Materialise™.

Added 03/26/2008

Available in sizes 1 and 2, the CDR PlusWire intraoral digital sensor uses a cable that, if broken, can be replaced chairside to eliminate lost chair time.

PlusWire offers three different cable lengths for different operatory setups.

An effortless 2-phase procedure allows easy sensor cable replacement in less than five minutes.

The sensor features the same CMOS APS technology found in the original CDR and CDR Wireless sensors.

• Cable can be replaced in less than five minutes.
• No waiting for repairs or factory replacement.
• Virtually no lost chair time, no inconvenienced patients.
• Multiple Cable Lengths: 3, 6 and 9 ft.

Added 03/24/2008

Better, Faster, Stronger. G3 is here!

DENTRIX has always led the way with new and innovative solutions in practice management, and G3 is no exception. New enhancements and services come together in G3 to make your practice more productive and more profitable.

Better
The enhanced Perio Chart allows you to easily enter exam data using an input device, such as a mouse or voice activation software (such as the new DENTRIX VoicePro System).

G3 also has enhanced functionality within the Document Center that will help your practice achieve your goal of practicing paperless. You can import and store any patient document—Excel, PowerPoint, Word, or PDF—directly to the Document Center for easy access. You can also electronically sign and display signatures in documents.

The all new Patient Questionnaire helps you save time by processing patient paperwork electronically and automating data entry. Your patient can complete the information in your lobby or even at home, and with a couple of clicks, the information is entered into DENTRIX.

Faster
G3 is faster, too. Much faster. A heavy hitter without being a heavyweight, benchmark testing has shown that G3 loads the chart more than 30% faster than previous versions, allowing you to spend more time where it matters most—with your patients.

Stronger
G3 makes in-depth treatment planning and effective patient education more effective than ever with the seamlessly integrated Guru patient education system. G3 and Guru allow you to attach consent forms, procedure animations and case details to a treatment plan and improve case acceptance and patient retention.

Added 03/20/2008

Hayes Handpiece Company is now offering a free test-drive of the Bien-Air Optima MX electric system. The Bien-Air Optima MX system, as well as other Bien-Air dental products, can now be purchased directly through participating Hayes locations. The in-office test-drive allows doctors and staff to try an electric handpiece and receive introductory training from Hayes.

The Bien-Air Optima MX features touch-sensitive screen control, allowing fast and easy installation without modifying the unit. The existing pedal continues to control the motor.

A fully air-driven unit can be upgraded to brushless electric operation of the highest level very simply. The control unit, which offers functions replacing several conventional devices, is mounted or attached to the table or one of its sides. To preserve perfect legibility, the control unit's inclination remains adjustable. The large colored touch-sensitive screen is easy to use, as the symbols and indications are clear and precise, facilitating parameter selection and setting according to your own customized values.

Contact your local Hayes Handpiece office to schedule a free test-drive of the Bien-Air Optima MX system.

Added 03/19/2008

The Emdeon Expressbill Services Module allows ADSTRA CLAIMS PLUS users to submit patient billing information with a few simple clicks of the mouse. In addition to submitting their claims electronically, offices will now be able to also transmit their statements electronically. The information is instantly transmitted to Emdeon, an electronic healthcare record service, where invoices and statements are prepared the next business day. This service prepares accurate, easy-to-read paper documents. The Emdeon Expressbill Services Module saves administrative time, reduces storage needs, and minimizes mailing and postage costs. Having an easy interface within the ADSTRA CLAIMS PLUS Patient Management Software Program saves time and increases efficiency while reducing chance for error.

Added 03/13/2008

eCentral is the new software solution that streamlines many of your non-treatment related tasks through automation and advanced integration. In fact, no other single software solution can do everything that eCentral can.

Added 03/07/2008

DEXIS Gives You Freedom of Choice

DEXIS is pleased to introduce DEXusb™ — a fast, robust USB sensor controller. This new offering presents another option to dental professionals who want a digital X-ray imaging solution that provides maximum portability, ease-of-use, and affordability. Interest in digital X-ray continues to grow, so providing this exciting connectivity alternative, for the DEXIS Classic sensor, along with the existing benefits of the DEXIS system, will help dentists move forward in their decision to go digital — with DEXIS.

DEXusb highlights include:

• Sleek, contemporary design with graceful curves and high-gloss white finish looks right at home in high-tech medical settings
• Highly portable — requires no docking stations or adapters to allow easy movement between operatories
• Completely self-powered — no need for batteries or an external power supply
• Common USB connectors offer simple, “plug and play” functionality
• Hot-swappable — connect and disconnect from computer at any time without interrupting workflow
• Software operation and image acquisition remain unchanged and as easy to use as always — there’s no additional software to launch or learn
• Versatile placement — designed for use on a counter top, and/or the unit can be wall-mounted (bracket included) for quick, convenient access
• Certified USB 2.0 and USB 1.1 compliant. Mini-USB connector is rated more than 3 times more durable than USB type B

Added 02/28/2008

Technology in the dental market has changed rapidly over the past few years. With the KODAK 9000 3D extraoral imaging system, 3D technology is now available to any dental practitioner. This two-in-one solution brings powerful, focused field 3D imaging to dental professionls like never before. You select the program on your computer, and the unit automatically switches between 3D and panoramic modes. You and your staff will never have to manually change the sensor.

Added 02/26/2008

The easy-to-use Aribex NOMAD Pro is the most advanced intraoral X-ray system available. Its handheld design improves dental radiography speed, convenience, and quality. The NOMAD Pro builds on the heritage of the award-winning NOMAD X-ray system.

Added 02/17/2008

IMTEC Corporation now offers a new addition to its Sendax MDI mini dental implant system, a revolutionary one-hour, one-stage solution for long-term denture stabilization. The new 2.1mm MDI implant joins the already successful original 1.8mm diameter standard thread implant (for dense bone) and 2.4mm Max thread implant (for softer bone). The 2.1mm implant offers increased surface area with the same standard thread design as the 1.8mm implant, enabling effective auto-advancement in dense bone. Collared 2.1mm MDI implants incorporate micro threading to enhance the healing and stability of connective and soft tissues while maintaining cortical bone. The new 2.1mm implant is another great option for MDI treatment plans.

All diameters in the MDI system are offered in lengths of 10, 13, 15, and 18mm. Classic or collared implant designs are available to accommodate various soft tissue depths. IMTEC’s MDI mini dental implant system is immediate loading and utilizes a patented, flapless placement protocol and often works with the patient’s existing denture.

IMTEC continues to deliver innovations at an affordable price. As the global leader in mini dental implants, IMTEC is committed to bring quality and value.

Added 02/17/2008

New EDGE DIAMOND Burs Provide Long Lasting Cutting Efficiency

Manufactured using a unique process that dramatically improves cutting efficiency and product longevity, new EDGE™ DIAMONDS from CLINICIAN’S CHOICE® are also well priced – giving you more cuts for your hard earned dollars. Diamond particles on EDGE burs are oriented to the most efficient cutting angle for maximum cutting performance and efficiency - ensuring a smoother, more efficient cut. EDGE Diamond natural particles are more uniform in size and distribution which results in a longer lasting diamond with less wear and tear to the handpiece – a major cost saving advantage over many competing diamonds. EDGE DIAMONDS produce less heat and will not easily get clogged with debris, and are available in single packs and convenient and economical 5-packs.

Added 02/04/2008

ADSTRA SYSTEMS has released the M4 version of their ADSTRA CLAIMS PLUS™ free management software for electronic claims, featuring a new control bar on top of the screen, underneath the main menu, and advanced financial options.

Added 01/14/2008

Lester A. Dine Inc., leaders in dental photography since 1952 now offers the ideal Dental Camera lens and flash for Canon’s 12.3 mp 40d digital slr camera. Canon’s 40d is the latest digital SLR camera produced to be both a high functioning dental and personal photographic system. The Dine/Canon 40d Dental Camera kit features the Dine invented ring flash for intra-oral photography plus an adjustable point flash for facial photography as well as descriptive anterior and lateral picture taking.

Added 01/14/2008

Consult-PRO WEB is a mini version of the Consult-PRO Chairside Education Software set up a personalized link on the Dr's Website. Customized with a logo and a personal message from the Dr's office Consult-PRO Web provides 33 Animated voiced over video presentations, introduced by a hygenist avatar and displayed on a small screen. A video link option will enable the Dr. to deliver a personal video message to patients, thanking them for visiting his/her website. Available FREE for one year with the purchase of one year of support, maintenance and updates for Chairside Patient Education Software.

Added 12/07/2007

The portable EyeMag Light is a powerful LED light source that brilliantly illuminates the visual field and ensures maximum detail recognition and high contrast. With its easy operation, integrated temperature regulation and a lightweight, compact design, EyeMag Light provides optimum wearing comfort for daily use, even during longer periods of treatment. The portable illumination system is an ideal supplement to the range of EyeMag loupes from Carl Zeiss.

Added 11/16/2007

EyeMag Smart loupes provide superior image quality at 2.5x magnification. The compact design of the optical components as well as the versatile adjustment possibilities, promote comfortable working conditions and intuitive operation. Large fields of view allow for an optimum overview of the working field. Customizable settings, in addition to a large selection of working distances, permit an optimal, ergonomic treatment position. The titanium frame carrier system ensures an even distribution of weight minimizing fatigue during long periods of treatment. The flip up function facilitates unobstructed vision and easy communication with your patients.

Added 11/16/2007

Offering a brilliant, stereoscopic image that facilitates better differentiation of ultra-fine structures, the new EyeMag Pro loupes are available in a wide range of working distances and magnification levels. High depth of field, image contrast and color fidelity extending to the peripheral zones, assures optimum image quality. A choice in carrier system, titanium frames or headband system ensures an outstanding fit. Customizable settings promote an upright position regardless of viewing angle. The flip-up function facilitates unobstructed vision and easy communication with your patients. All adjustments are simple and intuitive.

Added 11/16/2007

The 4.1mm Tapered Screw-Vent Implant brings increased flexibility and added choice for implant placement, allows clinicians to use the maximum bone available for optimal results, and conveniently utilizes the same prosthetics as the 3.7mm design — thus eliminating the need for additional inventory.

The 4.1mm Tapered Screw-Vent Implant incorporates all of the features and benefits of Zimmer Dental’s renowned Tapered Screw-Vent Implant System: proprietary friction-fit internal hex connection, triple-lead threads, both MTX™ and MP-1® HA surfaces, and a tapered implant body. The versatile Tapered Screw-Vent Implant is now available in 3.7mm, 4.1mm, 4.7mm, and 6.0mm sizes.

Added 11/01/2007